Medidor de calidad de aceite de cocina PCE-FOT 10

Medidor de calidad de aceite de cocina PCE-FOT 10

  • Code / Model:
  • Manufacturer: PCE Instruments
  • Department:
  • Category of products:
  • Sub-category: Instruments and equipment
  • You've seen it before.: 1
3 digit LCD display cooking oil quality meter / IP 65 protection / Rating by LED (red, blue, green) /
Polar compound range: 0,5 ... 40 % / Automatic disconnection
The cooking oil quality meter is a device that determines the quality of different types of oils. Health inspectors successfully use this cooking oil quality meter. The measurement is done directly in the oil. For this, the measuring tip must be introduced into the fryer. This ens
According to the recommendations of the DGF (German Association of Fat Sciences), 24% of polar compounds is the limit value for considering oil as palatable to the palate. Using used oil usually has many disadvantages. It influences taste, and therefore reduces quality. Addition

- Direct measurement in oil
- Prevention of health risks
- Rapid and safe on-site measurement
- Storage of different calibrations
- Adjustment of the correct frying point
- Determination of the quality of the frying oil
- Temperature measurement up to +200 °C
- LED (red, yellow, green)
- Water resistant
- Robust and impact resistant
- Adjustment of different types of oil
- Range: 0,5 ... 40% polar compounds

Temperature range+30 ... +200 °C
Range of polar compounds0,5 ... 40% polar compounds
Precision temperatureThe following conditions shall apply:
Precision polar compounds±3 % (between +30 ... +90 °C)
Resolution temperatureOther, not further worked than hot-rolled
Resolution of polar compounds0,1%
Food2 x 1.5 V batteries, of type AAA
Battery lifeApproximately 500 measurements / 25 hours of continuous operation
Other heat pumpsThe following information shall be provided:
Oil sensorCapacitive sensor
Operating temperature0 ... +50 °C
Storage temperature-20 ... +70 °C
Screen3 digit LCD
Dimension55 x 350 x 25 mm, without probe
WeightOther, of a kind used for the manufacture of goods
Other, of a kind used for the manufacture of goodsOther, of a thickness of not more than 0,01 mm
Type of protectionOther, not further worked than cutting
Assessment of the measurement results
0 ... 18,5%New oil, not used (blinking green LED)
19 ... 24 percentCritical area oil (blind yellow LED) It is recommended to change or partially replace the oil.
> 24 %The oil is used. The limit value set is exceeded (default value: 24%) and the red LED is lit.


Products Related