Base Unit Type 40 Points AC Power Supply Relay

Code / Model:
Manufacturer: Keyence
Department: Unclassified
Category of products: Unclassified
Sub-category: Unclassified
You've seen it before.: 1

Description of the product

General Specifications

Power Supply Voltage

100 to 240 VAC (+10 %/-15 %)

Output Voltage of Power Supply

24 VDC (±10 %; output capacity: 0.6 A)

Ambient Temperature

0 to 55 °C (32 to 131 °F) (without freezing)

Storage Temperature

-25 to +75 °C (-13 to +167 °F)

Ambient Humidity

5 to 95 % HR (without condensation)

Supported Voltage

1500 VAC for 1 minute, between power terminals and I/O terminals, and between all external terminals and the housing

Noise Immunity

1500 V peak-to-peak or more, pulse duration 1 µs, 50 ns (based on noise simulator), conforming to IEC standard (IEC61000-4-2/3/4/6)

Vibration Resistance

Intermittent Vibration

Frequency 5 to 9 Hz
Amplitude: 3.5 mm (0.14")

Frequency 9 to 150 Hz
Acceleration: 9.8 m/s²

Continuous Vibration

Frequency 5 to 9 Hz
Amplitude: 1.75 mm (0.07")

Frequency 9 to 150 Hz
Acceleration: 4.9 m/s²

Shock Resistance

Acceleration: 150 m/s², application time: 11 ms; three times in each of the X, Y and Z directions

Insulation Resistance

50 MΩ or more (megohmmeter of 500 VCD used to perform measurements between power terminal and input terminals, and between all external terminals and the housing)

Operating Environment

Dust and Corrosive Gas

As little as possible

Operating Altitude

2000 m (6600') or less

Overvoltage Category

AC: II, DC: I

Pollution Degree

Performance Specifications

Calculation Control Method

Program Storage Method

I/O Control Method

Update Method

Programming Language

Expanded Ladder, KV Script, mnemonic

Number of Instructions

Basic Instruction: 81 types and 182 instructions, Application Instruction: 39 types and 56 instructions, Calculation Instruction: 123 types and 311 instructions, Expansion Instruction: 92 types and 141 instructions, Total: 335 types and 690 instructions

Instruction Execution Speed

Basic Instruction: 50 ns minimum, Application Instruction: 170 ns minimum

Program Capacity

16k steps

Maximum Number of Connectable I/O Units

Maximum Number of I/O Points

256 (excluding I/O of the base unit)

Relay Input/Output/Internal Auxiliary Relay

R: Total of 9600 1-bit points (R000 to R59915)

Retention Relay

B: 8192 1-bit points (B0 to B1FFF)

Internal Auxiliary Relay

MR: 9600 1-bit points (MR000 to MR59915)

Retention Relay

LR: 3200 1-bit points (LR000 to LR19915)

Control Relay

CR: 1440 1-bit points (CR000 to CR8915)

Timer

T: 512 32-bit points (T0 to T511)

Counter

C: 256 32-bit points (C0 to C255)

Data Memory

DM: 32768 16-bit points (DM0 to DM32767)

Link Register

W: 16384 16-bit points (W0 to W3FFF)

Temporary Memory

TM: 512 16-bit points (TM0 to TM511)

High-Speed Counter

CTH: 3 points (CTH0 to CTH2)

32-bit Automatic Reset Counter

*5 (Input response: 100 kHz per single phase, 50 kHz per phase difference) *6

High-Speed Counter Comparator

CTC: 6 points (CTC0 to CTC5), 32 bits, two points per high-speed counter

Index Register

Z: 12 32-bit points (Z01 to Z12)

Control Memory

CM: 9000 16-bit points (CM0 to CM8999)

Base Unit of I/O

Input: 24 points, Output: 16 points

Common Input/Output Points (Type R):

1 point (common input), 6 points (common output)

Common Input/Output Points (Type T/TP):

2 points

Number of Comments/Tags Stored in the Main Unit

Device Comment: 20000, When writing a ladder program of maximum length, without tags.
Tag: 28000, When writing a ladder program of maximum length, without device comments.

Power-Off Retention Function

Program Memory: Can be rewritten 10000 times (Flash ROM)

Self-Diagnosis Function

CPU error, RAM error, and other problems

Input Specifications

Number of Relays

General Input: R000 to R007, R0014 to R107 (18 points)
High-Speed Phase A and Phase B Input: R008 to R013 (3 channels, 6 points in total)

Input Mode

24 VCD (collector open)

Maximum Input Voltage

26.4 VCD

Nominal Input Voltage

24 VCD (General Input: 5.3 mA, High-Speed Phase A and Phase B Input: 6.5 mA *8)

Minimum ON Voltage

19 VCD

Maximum OFF Current

1.5 mA

Common Point Mode

General Input: All points/1 common (1 terminal), High-Speed Phase A and Phase B Input: Common shared for all points (shared with general input)

Circuit Delay Time

General Input:

OFF to ON: Max. 30 µs (Typ. 3.5 µs), ON to OFF: Max. 50 µs (Typ. 15 µs)

High-Speed Phase A and Phase B Input:

OFF to ON: Max. 2 µs (Typ. 1.1 µs), ON to OFF: Max. 2 µs (Typ. 0.3 µs)

Input Time Constant

Normal: 10 ms, When using the HSP instruction: 10 µs, When CR2305 is ON: 10 µs to 10 ms, eight-level switching possible (configured with CM1620). Can also be configured from the Unit Editor. *9

Input Time Constant Delay

Input time constant adjustment of 10 µs: Digital filter 1.6 to 2 µs, Input time constant adjustment of 20 µs: Digital filter 9 to 12 µs, Input time constant adjustment of 110 µs: Digital filter 90 to 93 µs, Input time constant adjustment of 500 µs: Digital filter 300 to 400 µs, Input time constant adjustment of 1 ms: Digital filter 800 to 900 µs, Input time constant adjustment of 2.5 ms: Digital filter 2.3 to 2.4 ms, Input time constant adjustment of 5 ms: Digital filter 4.0 to 4.5 ms, Input time constant adjustment of 10 ms: Digital filter 9 to 9.5 ms

Response Frequency

(High-Speed Phase A and Phase B Input) Single phase: 100 kHz, phase difference: 50 kHz, 24 V ±10 %, Service 50 %

Output Specifications

Number of Relays

R500 to R515 (16 points)

Output Mode

Relay

Rated Load

250 V AC/30 V DC, 2 A

Common Point Mode

2 to 4 points/1 common

ON/OFF Response Time

10 ms or less

ON Resistance

50 mΩ or less

Minimum Applicable Load

100 µA/100 mVDC

Relay Life

Electrical: 100000 cycles or more (20 cycles/minute), Mechanical: 20000000 cycles or more

Relay Replacement

Impossible

Integrated Serial Port

Interface

RS-232C standard

Connection

Modular connector

RS-232C Transmission Specifications

Transmission Speed

1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps

Transmission Method

Full duplex

Data Format

Start bit: 1 bit, Data bits: 7 bits, Stop bit: 1 bit, 2 bits

Error Detection

Parity: Even, Odd, None

Transmission Distance

15 m (49.2')

Number of Transmission Units

Indicator Lights

SD (green), RD (red)

Internal Current Consumption

86 VA (VA values are calculated with a power factor of 30 %.)

Weight

Approx. 660 g

*1 The guaranteed range as a system (excluding elements specifically indicated for the units and cassettes). *2 The temperature below the center of the unit (30 mm (1.18")), inside a control panel. *3 These specifications correspond to situations where the unit is mounted on a DIN rail, and in which the unit is mounted directly on the panel. *4 Complies with JIS B 3502 and IEC61131-2, Scan times: 10 times (100 minutes) in each of the X, Y and Z directions *5 The settings can also be configured so that automatic reset is not used. *6 Only open collector drivers are supported. Line drivers are not compatible. *7 The destination device can be configured by clicking “CPU system setting” and then “Power off holding” in KV STUDIO. *8 Reference value of the input current. *9 The response time of the input, corresponding to the time constant of the input, can be calculated as shown below. (Response Time) = (Input Circuit Delay) + (Digital Filter Delay) Example: Maximum response time, when the input time constant is set to 500 µs OFF to ON: 30 µs (circuit delay) + 400 µs (digital filter) = 430 µs ON to OFF: 50 µs (circuit delay) + 400 µs (digital filter) = 450 µs