PJ-V90 Base Controller

This document provides specifications for the PJ-V90 base controller.

Model

PJ-V90

Type

Base controller

Combination Sensor Head

PJ-V20, PJ-V21, PJ-V22, PJ-V40, PJ-V41, PJ-V42

Response Time

FSD1, 2/SSD
AUX: 15 ms maximum, ON to OFF (including the sensor head response time)

Safety Category

Category 4 according to EN954-1
ESPE (type 4 AOPD according to IEC 61496)

External Input

Input Method

• Non-voltage or voltage input

Output

Life-span

Mechanical life: 10,000,000 times or more, electrical life: 100,000 times or more (When using an inductive load, we recommend that you use a surge protector.)

FSD1 , 2/SSD

230 VAC, 4 A; 30 VDC, 2 A (resistive load); 230 VAC, 4 A (cosØ = 0.3; inductive load); 30 VDC, 1 A (cosØ = 0.3; inductive load)

AUX

115 VAC, 0.5 A; 30 VDC, 2 A (resistive load); 115 VAC, 0.25 A (cosØ = 0.3; inductive load); 30 VDC, 1 A (cosØ = 0.3; inductive load)

Protection Circuit

Power supply part: reversed polarity protection, surge absorber

Approved Standards

This product can be used in America, Canada, and all countries in Europe (see the manual).

Rating

Power Voltage

24 VDC ±10 %, Ripple (P-P) 5 % or less

Power Consumption

20 W maximum (including the sensor head)

Current Consumption

• PJ-V90 + V20: 350 mA, PJ-V91 + V20: 110 mA, PJ-V21: 25 mA, PJ-V22: 15 mA
• PJ-V90 + V40: 340 mA, PJ-V91 + V40: 110 mA, PJ-V41: 21 mA, PJ-V42: 19 mA

Environmental Resistance

• Enclosure rating: IP20 (install the product in a panel with a rating of IP54 or higher)
• Ambient temperature: -10 to +55 °C (14 to 131 °F) (No freezing)
• Relative humidity: 35 to 95 % RH (No condensation)
• Vibration resistance: 10 to 55 Hz, Double amplitude 0.7 mm (0.03"), 20 times in each of the X, Y, and Z directions
• Shock resistance: 100 m/s², 16 ms pulse, 1,000 times in each of the X, Y, and Z directions

Material

Polycarbonate

Weight

Approx. 520 g