Type

Base controller

Combination sensor head: PJ-V20, PJ-V21, PJ-V22, PJ-V40, PJ-V41, PJ-V42

Response time

FSD1, 2/SSD AUX: 15 ms maximum, ON to OFF (including the sensor head response time)

Safety category

• Category 4 according to EN954-1
• ESPE (type 4 AOPD according to IEC 61496)

External input

Input method

Non-voltage or voltage input *1.

Output

Life-span

Mechanical life: 10,000,000 times or more, electrical life: 100,000 times or more (When using an inductive load, we recommend using a surge protector.)

FSD1 , 2/SSD

• 230 VAC, 4 A; 30 VDC, 2 A (resistive load); 230 VAC, 4 A (cosØ = 0.3; inductive load); 30 VDC, 1 A (cosØ = 0.3; inductive load)

AUX

• 115 VAC, 0.5 A; 30 VDC, 2 A (resistive load); 115 VAC, 0.25 A (cosØ = 0.3; inductive load); 30 VDC, 1 A (cosØ = 0.3; inductive load)

Protection circuit

Power supply part: reversed polarity protection, surge absorber

Approved standards

This product can be used in America, Canada, and all countries in Europe (see the manual).

Rating

Power voltage

24 VDC ±10 %, Ripple (P-P) 5 % or less

Power consumption

20 W maximum (including the sensor head)

Current consumption

• PJ-V90 + V20: 350 mA, PJ-V91 + V20: 110 mA, PJ-V21: 25 mA, PJ-V22: 15 mA
• PJ-V90 + V40: 340 mA, PJ-V91 + V40: 110 mA, PJ-V41: 21 mA, PJ-V42: 19 mA

Environmental resistance

Enclosure rating

IP20 (install the product in a panel with a rating of IP54 or higher)

Ambient temperature

-10 to +55 °C (14 to 131 °F) (No freezing)

Relative humidity

35 to 95 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 0.7 mm (0.03"), 20 times in each of the X, Y, and Z directions

Shock resistance

100 m/s², 16 ms pulse, 1,000 times in each of the X, Y, and Z directions

Material

Polycarbonate

Weight

Approx. 520 g