Model of the product

The following information is provided:^*1

Type

Thrubeam

Output

PNP

Shape

Flat

Cable connection

M8 connector (3 pin)

Detection distance

0.6 m

Number of control outputs

1 output

Output operation

Output 1

The Dark-ON

Output 2

- What ?

Response time

Output 1

0.5 ms

Output 2

- What ?

Sensitivity adjustment

None of them

Spot diameter

- What ?

Light source

4 element, point light source, LED network (650 nm)

The Commission shall adopt delegated acts in accordance with Article 21 of this Regulation.

- What ?

Indicator lamp

The power supply indicator shall be the power supply indicator.

Control of output

30 VDC or lower, 50 mA or lower
Leakage current:
When 3 kΩ load resistance, 0.3 mA or lower. When 1 kΩ load resistance, 0.5 mA or lower. When 0.2 kΩ load resistance, 1.5 mA or lower
The following shall be added:
When 10 mA or lower, 1.0 V or lower. When 10 to 30 mA, 1.5 V or lower. When 30 to 50 mA, 2.0 V or lower.

Protection circuit

The power supply reverse connection protection, output overcurrent protection,
The power supply is not a power supply.

Rating

Power voltage

10 to 30 VDC, including 10 per cent ripple (P-P)

Current consumption

The following is the list of the types of equipment used:

Environmental resistance

The following is a list of the categories of companies listed in Annex I:

The Commission shall adopt delegated acts in accordance with Article 21 of Regulation (EC) No 1069/2009.

Insulation resistance

20 MΩ or higher (500 VDC)

Environmental light

Incandescent lamp: 5,000 lux or lower, Sunlight: 20,000 lux or lower

Environmental temperature

-25 to +55 °C -13 to 131 °F (Not freezing)

Storage temperature

-25 to +75 °C -13 to 167 °F

Relative humidity

35 to 85 % RH (No condensation)

Withstand voltage

The following information is provided for the purpose of this Regulation:

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions

Shock resistance

The following conditions shall apply:², 6 times in each of the X, Y, and Z directions

Other materials

The following information is provided by the manufacturer:
Protective cord: polymethylpentene, filler: polyester based resin