Model

N-R2

Interface

RS-232C

Power Supply of Code Reader

5 VCD ±5% (650 mA)

Terminal Block

Input

• Number of inputs: 2 inputs (IN1 and IN2)
• Type of input: Bidirectional voltage input
• Maximum nominal value: 26.4 VCD
• Minimum voltage in ON: 15 VCD
• Maximum current in OFF: 1 mA

Output

• Number of outputs: 4 outputs (OUT1 to 4)
• Type of output: Photo MOS relay output
• Nominal load: 30 VCD, 100 mA
• Leakage current in OFF: OFF: 0.1 mA or less
• Residual voltage in ON: 1 V or less

Communication Specifications

Head Port

• Number of inputs: 1 (12-pin round connector)

Supported Communication Standards

Complies with RS-232C

Communication Speed

4,800, 9,600, 19,200, 31,250, 38,400, 57,600, 115,200 bps

Data Bit Number

7/8 bits

Stop Bit Number

1/2 bits

Parity Control

None/Even/Odd

Communication Standard

Complies with RS-232C

Connector

1 (9-pin D-sub connector)

Output Interface

Total Extension Length

15 m 49.21' or less (including the head cable)

Nominal Value

Power Supply Voltage

24 VCD (+10%, -20%)

Current Consumption

380 mA max.

Environmental Resistance

Ambient Temperature

0 to +50°C 32 to 122°F (without freezing)

Storage Ambient Temperature

-20 to +60°C -4 to 140°F (without freezing)

Relative Humidity

35 to 85% HR (without condensation)

Operating Environment

No presence of dust or corrosive gases

Vibration

10 to 55 Hz, double amplitude of 1.5 mm 0.06", 2 hours in the X, Y and Z directions

Weight

Approx. 135 g