Model of the

DL-EP1

Indicator

The following information is provided by the manufacturer:
The following information is provided by the Commission:
The sensor communication indicator (D-bus) LED bi-colour (green/red)

Specifications
Ethernet

Compliance with rules

The following definitions shall apply:

Transmission speed

The following information is provided by the Commission in the Official Journal of the European Union.

Transmission means

STP cable or category 3 or higher UTP cable (10BASE-T)/STP cable or category 5 or higher or UTP cable (100BASE-TX)

Maximum length of cable

100 m 328.08' (distance between DL-EP1 and Ethernet switch)

Specifications of
sensor connection

Connectable sensors

Sensor amplifiers with D-Bus support^*1

Number of sensor units
Other electrical equipment

Up to 15 units.^*2

Specifications
Ethernet

Maximum number of concentrators
Other electrical equipment

The following information shall be provided:

The following information is provided by the manufacturer:

Cyclical communication (implied messaging)
Communication of messages (explicit messaging) Compatible with UCMM and Class 3

The following information is provided by the manufacturer:

Compatible functions

64

RPI (transmission cycle)

The following information is provided for in the Annex to Implementing Regulation (EU) No 1308/2013:

Tolerable bandwidth for cyclical communication

Other, not further worked than hot-rolled

Tests of conformity

Compatible with A7

Energy

Including 20 to 30 curved VCDs (p-p) 10% (This voltage is supplied by the connected sensor amplifier)

Electricity consumption

1500 mW or less (at 30 V 50 mA maximum)

Environmental resistance

Degree of pollution

2

The temperature of the room

From -20 to +55 °C -4 to 131 °F (without freezing)

Relative humidity

35 to 85 % HR (without condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the directions X, Y and Z

Other materials

Box of the main unit: Polycarbonate

Weight

Approximately 70 g