SERVOMOTOR REJILLA GENERADOR 60VA HONEYWELL MS4120A1209
If you would like a quote for this product, please click the following button.
REQUEST QUOTES
Product SpecificationsApplication HVAC Dimensions (in.) 9.72 in high x 3.94 in wide x 2.95 in deep Dimensions (mm) 247 mm high x 100 mm wide x 75 mm deep Includes Mounting bracket, self-centering shaft adapter, 3mm crank Weight (lb) 6 lb Weight (kg) 2.72 kg Materials Aluminum housing, Plenum rated plastic access cover Comments Integral 1/2 in. NPSM conduit connection. Mounting Direct Coupled Frequency 50 Hz; 60 Hz Approvals, Underwriters Laboratories Inc. UL873, Plenum Rated Electrical Connections Enclosed screw terminal strip (22 to 14 AWG) Operating Humidity Range (% RH) 5 to 95% RH, non-condensing Supply Voltage 100 to 250 Vac Power Consumption Driving-- 60 VA, Holding-- 13 VA Shipping and Storage Temperature Range (F) -40 F to +158 F Shipping and Storage Temperature Range (C) -40 C to +70 C Approvals, CE 89/336/ECC, 73/23/EEC Approvals, Canadian Underwriters Laboratories Inc. cUL C22.2 No. 24-93 Ambient Temperature Range (F) -40 F to +140 F Ambient Temperature Range (C) -40 C to +60 C Switch Ratings 250 Vac, 5 A res Approvals, C-Tick N314 Environmental, Electrical or Ingress Protection Rating NEMA 2 Internal Auxiliary Switch 2 Maximum Noise Rating Driving (dB(A) @ 1m)-- 40; Holding (dB(A) @ 1m)-- 20 (no audible noise) Stroke 95 ±3 degrees Shaft Dimensions (in.) 3/8 to 1.06 in. round or 3/8 to 11/16 in. square Actuator Type Damper; Valve Control Signal Two position; SPST Fail Safe Mode Spring Return Torque Rating (lb-in.) 175 lb-in. Torque Rating (Nm) 20 Nm Spring Return Torque/Force (lb-in., lbf) 175 lb-in. Spring Return Torque/Force (Nm, N) 20 Nm Additional Torque Ratings (lb-in.) Maximum Stall-- 300 lb-in. Additional Torque Ratings (Nm) Maximum Stall-- 34 Nm External Auxiliary Switches Available Yes, SW2-US Rotational Stroke Adjustment Mechanically limited 5 degree increments Timing, Nominal Driving @ 60 Hz-- 45 sec Spring Return Timing Maximum-- 20 sec Shaft Adapter Type Self-centering clamping Manual operation Manual crank Shaft Dimensions (mm) 10 to 27 mm round or 10 to 18 mm square Spring Return Direction By orientation |
