SENSOR POSICION SIKO MSK5000-0520

Category: Proximity sensors
Maker: Siko
Code:: MSK5000-0520
Model:: SENSOR POSICION SIKO MSK5000-0520

Follow @ADJDiTec

* If you want a quote for this product, you can request it by pressing the following button.

Description

Mechanical data

Feature	Technical data	Additional information
Housing	synthetic material ABS black	K design
	zinc die-cast/aluminum	M design, aluminum front cover
	zinc die-cast	ZM design
Sensor/band reading distance	0.1 … 2 mm	O, I reference signals
	0.1 … 1.5 mm	R reference signal
Sensor/ring reading distance	0.1 … 2 mm	O, I reference signals
	0.1 … 1.5 mm	R reference signal
Cable sheath	PUR, suitable for drag-chain use	6, 8-wire ø5_-0.4 mm

Peripheral speed

		Peripheral speed Vmax [m/s]
Scaling factor	1250	4.00	3.20	1.60	0.80	0.32	0.20	0.10	0.05	0.03	0.01
	250	20.00	16.00	8.00	4.00	1.60	1.00	0.50	0.25	0.13	0.06
	125	25.00	25.00	16.00	8.00	3.20	2.00	1.00	0.50	0.25	0.12
	50	25.00	25.00	25.00	20.00	8.00	5.00	2.50	1.25	0.63	0.30
	25	25.00	25.00	25.00	25.00	16.00	10.00	5.00	2.50	1.25	0.61
	12.5	25.00	25.00	25.00	25.00	25.00	20.00	10.00	5.00	2.50	1.21
Pulse interval [μs]		0.20	0.25	0.50	1.00	2.50	4.00	8.00	16.00	32.00	66.00
Counting frequency [kHz]		1250.00	1000.00	500.00	250.00	100.00	62.50	31.25	15.63	7.81	3.79

Electrical data

Feature	Technical data	Additional information
Operating voltage	6.5 … 30 V DC	reverse polarity protected
	4.75 … 6 V DC	without reverse polarity protection
Current consumption	<25 mA	at 24 V DC, unloaded
	<75 mA	loaded
Output circuit	PP, LD (RS422)
Output signals	A, /A, B, /B, I, /I bzw. R, /R
Output signal level high	>UB - 2.5 V	PP
	>2.5 V	LD
Output signal level low	<0.8 V
Pulse width of reference signal	1 or 4 increment(s)
Real-time requirement	speed-proportional signal output
Type of connection	open cable end
	plug connector	7/8-pole
	D-Sub	9-pole

Signal pattern

The logical condition of signals A and B is not defined in reference to the index signal I or the reference signal R. It can deviate from the signal form.

Reference or index signal with 4 increments (360°) signal length is only valid from the 5th counting step onwards. A corresponding delay should be taken into consideration after switching on the operating voltage.

Pulse interval

System data

Feature	Technical data	Additional information
Resolution	0.001, 0.005, 0.01, 0.025, 0.05, 0.1 mm
Scaling factor	12.5, 25, 50, 125, 250, 1250
System accuracy	± (0.025 + 0.01 x L) mm, L in m	at T_U = 20 °C
	±0.1°	at T_U = 20 °C
Repeat accuracy	±10 µm
Measuring range	∞
Circumferential speed	depending on scaling factor and pulse interval	see table
Travel speed	depending on resolution and pulse interval	see table

Ambient conditions

Feature	Technical data	Additional information
Ambient temperature	-10 … 70 °C
Storage temperature	-30 … 80 °C
Relative humidity	100 %	condensation admissible
EMC	EN 61000-6-2	interference resistance / immission
	EN 61000-6-4	emitted interference / emission
Protection category	IP67	EN 60529
Shock resistance	500 m/s², 11 ms	EN 60068-2-27
Vibration resistance	100 m/s², 5 … 150 Hz	EN 60068-2-6