Keyence FS-V11P Sensor

## FS-V11 Photoelectric Sensor **Model:** FS-V11 **Type:** Main Unit **Light Source:** Red LED **Response Time:** 250 μs (FINE)/500 μs (TURBO)/1 ms (SUPER TURBO) **Operating Mode:** Light-ON/Dark-ON (Selectable by selector) **Indicator Lamp:** * Display indicator: Red LED * Digital seven-segment LED monitor: Four digits, red LED. * Bar LED monitor: One orange LED and six green LEDs. **Timer Function:** * ON delay: 40 ms, OFF delay: 10 ms, Timer OFF (Selectable by selector) **Output Signal:** Open-collector NPN 100 mA max. (24 VCD max.), Residual voltage: 1 V max. **Protection Circuit:** Reverse polarity protection, overcurrent protection, transient protection **Expansion Units:** Up to 16 expansion units can be connected (for a total of 17 units).^*1 **Mutual Interference Suppression:** FINE: 4, TURBO/SUPER: 8 **Classification:** | **Parameter** | **Value** | |---|---| | Power Supply Voltage | 12 to 24 VCD (±10%), Ripple factor (P-P) 10% max., Class 2^*2 | | Current Consumption | 50 mA max. | **Environmental Resistance:** | **Parameter** | **Value** | |---|---| | Ambient Illumination | Incandescent light: 10,000 lux max., Sunlight: 20,000 lux max. | | Operating Temperature | -10 to +55°C (14 to 131°F), no freezing | | Operating Humidity | 35 to 85% HR (no condensation) | | Vibration | 10 to 55 Hz, Double amplitude: 1.5 mm (0.06"), 2 hours each on the X, Y and Z axes | | Shock Resistance | 500 m/s² in the X, Y and Z directions, 3 times respectively | **Structure Material:** Polycarbonate **Weight:** Approx. 80 g ^*1 If more than one unit is used, the ambient temperature varies. Mount the units on the DIN rail with mounting hardware and verify that the output current is less than 20 mA. 3 to 10 units: -10 to +50°C (14 to 122°F), 11 to 16 units: -10 to +45°C (14 to 113°F) ^*2 Neither the FS-V12 nor the FS-V10 can be used as a standalone unit.