FlexMax Outback FM 60A MPPT Charge Controller
Tweet
Follow @ADJDiTec
.
If you would like a quote for this product, please click the following button.
REQUEST QUOTES
Battery voltage nominal 12, 24, 36, 48 or 60 VDC (selectable when powering on the unit)
Maximum output current 80 amps @ 40ºC/104ºF with adjustable current limit
Maximum array PV power 12VCC systems 1250W / 24 VCC systems 2500W / 48 VCC systems 5000W / 60 VCC systems 7500W
Open circuit voltage array PV 150VDC maximum value under low temperature conditions / 145VDC for startup and maximum operating conditions
Standby consumption Less than 1W
Power conversion efficiency 97.5% @ 80 Amps in 48 VCC system typical
Charge regulation Five stages: bulk charge, absorption, float, standby and equalization
Voltage regulation adjustment points From 10 to 60 VDC, user adjustable with password protection
Equalization voltage Programmable voltage and timing - Automatic completion
Battery temperature compensation Automatic with optional RTS (remote temperature sensor) / 5.0 mV per ºC per cell
Battery voltage delta Allows charging a lower voltage battery with a higher voltage PV array - Max 150VDC
Auxiliary control output Programmable 12VDC output available for different applications (max. 0.2A DC)
Information display 8cm (3.1”) backlit LCD screen, 4 lines and 80 characters
Remote display and controller Optional - MATE or MATE2 with RS232 serial port for communications
Data network connection OutBack Red data network via RJ45 connector with CAT 5e (8-wire) cable
Data logging Last 128 days - Ah, Wh, peak W, Amps, PV voltage, float time, battery max and min voltage, absorption for each day plus accumulated values of Ah and kWh
Wind/hydro energy systems Consult manufacturer for compatible systems
Positive to ground systems Precise bipolar switch to disconnect positive and negative conductors in the PV array and battery. (HUB4 or HUB10 are not recommended for use in positive to ground systems)
Operating temperature range -40ºC to +60ºC (Output power derates from 40ºC)
Environmental category For indoor installation
Connection holes One 35mm (1”) rear; One 35mm (1”) left; Two 35mm (1”) bottom
Warranty 5 years
Weight Unit 5.56 Kg. - 12.20 lbs
Shipping weight 7.10 Kg. - 15.75 lbs
Dimensions (height x width x depth) Unit 41.3x14x10 cm. - 16.25 x 5.75 x 4”
Shipping 53 x 27 x 25 cm - 21 x10.5 x 9.75”
Options Remote temperature sensor (RTS), HUB4, HUB10, MATE and MATE2
Menu languages Spanish and English on the same unit