HUAWEI Smart Solar Optimizer SUN2000P-600W

The product described is a Huawei SUN2000P-600W Optimizer with code 02313TTE-003. This optimizer allows for the optimization of a solar panel's performance within a string of panels connected to a Huawei SUN2000 L1, M1, M2, and M3 series inverter. Thanks to this optimizer, when a shadow acts upon one of the panels with the optimizer, the overall string performance won't be affected, increasing the total production of the installation. The maximum rated power of the panel is 600w+-5%. Monitoring can be achieved panel-by-panel thanks to the MBUS CC connection. This allows us to monitor the power and performance of each individual panel. Communication is carried out via PLC through the direct current wiring coming from the panels. The Huawei SUN2000P-600W Smart PV Optimizer has an IP68 protection rating, and it comes with an accessory for installation underneath the frame of the solar panel to which it's connected. It features a 1m cable to facilitate connection. It accepts an input of 600w, with a tolerance of +5%, making it possible to install modules up to 630w, although the output would be limited to 600w. In any case, rarely do the STC conditions of radiation and temperature occur, at which the panel reaches its maximum power, so there wouldn't be an issue installing 630w panels without losing performance. The operating voltage range is 10-80v, and the short-circuit current is 15A, making it incompatible with G12 Half Cut cell panels, which typically have 18A.