Amperímetro PCE-CM 5-ICA incl. certificado de calibración ISO

Code / Model:
Manufacturer: PCE Instruments
Department: Test and measurement
Category of products: Multi-meters and accessories
Sub-category: The correct subcategory is **- Multimeter**. The product described is an ampere, which is a type of multimeter.
You've seen it before.: 1

Description of the product

The following is the list of the parameters used in the calculation of the current:
Direct frequency measurement with the current clip / Immediate use / Easy handling / Incl. ISO calibration certificate

The amp is a multi-functional meter. The amp can measure current without contact up to 200 A AC. The amp measurement range covers a wide sector. Thanks to the amp can measure without contact while the operation is active.
Another feature of the amperometer is the NCV (Not Connected Voltage) measurement. With this function the amperometer tells you whether a cable has voltage or not. This function also does not require preparing the measurement. Both features of the amperometer reduce the risk of suffering an
The ampere is also used to measure resistance and continuity testing, and to detect whether a relay in an electrical cabinet is completely closed, and to determine any fluctuations in current, and for all these reasons, it is an indispensable tool for any electrician.

- Inductive current measurement up to 200 A AC
- Voltage measurement with frequency meter
- Hold function to freeze value on screen
- Temperature measurement with thermoelectric
- Small and compact design
- Less internal resistance with the LowZ function
- Including ISO calibration certificate


The following is the list of the parameters:
Other power
Rate	Resolution adopted by the Council	Accuracy
200 A	0,1 A	±(3,0 % + 3 digits)
Frequency range: 40 ... 400 Hz
Maximum input current: 200 A AC

Continuous current
Rate	Resolution adopted by the Council	Accuracy
Other, of a kind used for the manufacture of goods	0,1 μA	±(1,0 % + 4 digits)
Other, not further worked than hot-rolled	1 μA	±(1,0 % + 4 digits)
The maximum input current: 1000 μA

Continuous voltage
Rate	Resolution adopted by the Council	Accuracy
Other electrical equipment	0,1 mV	±(0,7 % + 3 digits)
6 V	0,001 V	±(0,7 % + 3 digits)
60 V	0,01 V	±(0,7 % + 3 digits)
Other electrical equipment	0,1 V	±(0,7 % + 3 digits)
The input impedance shall be:
The maximum input voltage shall be 600 V DC AC rms.

Alternating voltage
Rate	Resolution adopted by the Council	Accuracy
6 V	0,001 V	±(0,8% + 3 digits)
60 V	0,01 V	±(0,8% + 3 digits)
Other electrical equipment	0,1 V	±(0,8% + 3 digits)
The input impedance shall be:
The maximum input voltage shall be 600 V DC AC rms.
Frequency range: 40 ... 400 Hz

LowZ AC/DC
Rate	Resolution adopted by the Council	Accuracy
Other electrical equipment	0,1 V	±(2,0 % + 3 digits)
The input impedance shall be:
The maximum input voltage shall be 600 V DC AC rmsS.
Frequency range: 40 ... 400 Hz

The resistance
Rate	Resolution adopted by the Council	Accuracy
600 Ω	0,1 Ω	±(0,8% + 3 digits)
6 kΩ	0,001 kΩ	±(0,8% + 3 digits)
Other, of a kind used for the manufacture of goods	0,01 kΩ	±(0,8% + 3 digits)
Other, of a kind used for the manufacture of goods	0,1 kΩ	±(0,8% + 3 digits)
6 MΩ	0,001 MΩ	±(1,2% + 3 digits)
60 MΩ	0,1 MΩ	±(1,2% + 3 digits)
Test voltage (open circuit): 0,4 V
Protection against overvoltage: 250 V AC/DC rms

Continuity test
Rate	Resolution adopted by the Council	Accuracy
- What ?	0,1 Ω	- What ?
Protection against overvoltage: 250 V AC/DC rms
Signal tone in < 50 Ω

Test of diodes
Rate	Resolution adopted by the Council	Accuracy
- What ?	0,001 V		- What ?
Protection against overvoltage: 250 V AC/DC rms
The following shall be added to the list of the following:
The following shall be added to the list of the following:

Capacity
Rate	Resolution adopted by the Council	Accuracy
Other, not further worked than hot-rolled	0,01 nF		±(4,0 % + 5 digits)
Other, not less than €1	0,1 nF		±(4,0 % + 5 digits)
Other, not further worked than hot-rolled	0,001 μF		±(4,0 % + 5 digits)
Other, of a thickness of not more than 0,15 mm	0,01 μF		±(4,0 % + 5 digits)
Other, of a thickness of not more than 0,9 mm	0,1 μF		±(4,0 % + 5 digits)
The following table shows the following:	1 μF		±(4,0 % + 5 digits)
Other, not further worked than hot-rolled	0,01 mF		±(4,0 % + 5 digits)
Protection against overvoltage: 250 V AC/DC rms

The temperature (type K)
Rate	Resolution adopted by the Council	Accuracy
-20 ... 0 °C	1 °C		±(3,0 % + 2 digits)
1 ... 400 °C	1 °C		±(2,0 % + 2 digits)
-4 ... 32 °F	1 °F		±(3,0 % + 4 digits)
33 ... 752 °F	1 °F		±(2,0 % + 4 digits)
Protection against overvoltage: 250 V AC/DC rms

Frequency (with current pinch)
Rate	Resolution adopted by the Council	Accuracy
The frequency of the sound	0,01 Hz		±(1,5% + 5 digits)
The frequency of the sound is:	0,1 Hz		±(1,5% + 5 digits)
Other, of a kind used for the manufacture of goods	Other, of a kind used for the manufacture of goods		For reference only
Frequency range: 10 Hz to 1 kHz
The maximum input voltage shall be 200 A AC rms.
Input range: > 60 A AC rms (increases the input current, also increases the frequency)

Frequency (voltage measurement)
Rate	Resolution adopted by the Council	Accuracy
The frequency of the sound	0,01 Hz		±(1,5% + 5 digits)
The frequency of the sound is:	0,1 Hz		±(1,5% + 5 digits)
The frequency of the signal shall be:	Other, of a kind used for the manufacture of goods		±(1,5% + 5 digits)
Other, of a kind used for the manufacture of goods	Other, of a kind used for the manufacture of goods		For reference only
Frequency range: 10 Hz ... 10 kHz

Frequency (direct measurement)
Rate	Resolution adopted by the Council	Accuracy
The frequency of the sound	0,01 Hz		±(0,3 % + 5 digits)
The frequency of the sound is:	0,1 Hz		±(0,3 % + 5 digits)
The frequency of the signal shall be:	1 Hz		±(0,3 % + 5 digits)
Other power generators	Other, of a kind used for the manufacture of goods		±(0,3 % + 5 digits)
Other power units	Other, not further worked than hot-rolled		±(0,3 % + 5 digits)
Other power supplies	1 kHz		±(0,3 % + 5 digits)
The frequency of the transmission shall be:	0,01 MHz		±(0,3 % + 5 digits)

The frequency of the signal shall be:
The input impedance shall be:
Input range: >0,2 V AC rms (increases the input voltage, also increases the frequency)
The maximum input voltage shall be 250 V AC rms.

Working cycle
Rate	Resolution adopted by the Council	Accuracy
5 ... 95 percent	0,1%		± 0,3%

Other specifications
Selection of range	Automatic and manual
Maximum working height	2000 m
Screen	LCD
Maximum value on screen	5999 of the following:
Upper overrange	The display indicates "OL"
Lower overrange	The display indicates "-OL"
Measurement quota	3 measurements per second
Automatically disconnected	After 15 minutes of inactivity
Food	1 x 9 V battery
Operating conditions	0 ... 40 °C
Storage conditions	-10 ... 50 °C
Dimension	Other, of a thickness of not more than 10 mm
Weight	Approximately 265 g (including pile)