Model N-R2

This document outlines the specifications for the Model N-R2 device.

Interface

RS-232C

Power Supply for Code Reader

5 VCD ±5% (650 mA)

Terminal Block

Input

• Number of inputs: 2 inputs (IN1 and IN2)
• Type of input: Bidirectional voltage input
• Maximum nominal value: 26.4 VCD
• Minimum voltage in ON: 15 VCD
• Maximum current in OFF: 1 mA

Output

• Number of outputs: 4 outputs (OUT1 to 4)
• Type of output: Photo MOS relay output
• Nominal load: 30 VCD, 100 mA
• Leakage current in OFF: OFF: 0.1 mA or less
• Residual voltage in ON: 1 V or less

Communication Specifications

Head Port

• Number of inputs: 1 (12-pin round connector)

Supported communication standards: Complies with RS-232C

Communication Speed

4,800, 9,600, 19,200, 31,250, 38,400, 57,600, 115,200 bps

Data Bit Number

7/8 bits

Stop Bit Number

1/2 bits

Parity Control

None/Even/Odd

Communication Standard: Complies with RS-232C

Connector

• 1 (9-pin D-sub connector)

Output Interface

Total extension length: 15 m 49.21' or less (including the head cable)

Nominal Value

Power Supply Voltage

24 VCD +10%, -20%

Current Consumption

380 mA or less

Environmental Resistance

Operating Environment

• No presence of dust or corrosive gases
• Ambient temperature: 0 to +50 °C (32 to 122 °F) (No freezing)

Storage Temperature

-20 to +60 °C (-4 to 140 °F) (No freezing)

Relative Humidity

35 to 85% HR (No condensation)

Vibration Resistance

10 to 55 Hz, Double Amplitude 1.5 mm (0.06"), 2 hours in each of the X, Y and Z directions

Weight

Approx. 135 g