KEYENCE FD-XS8 + FD-XC8R1 + FD-XA2

KEYENCE FD-XS8 + FD-XC8R1 + FD-XA2

  • Code / Model:
  • Manufacturer: Keyence
  • Department:
  • Category of products:
  • Sub-category: Automation and control
  • You've seen it before.: 1

Specifications

Model of the

FD-XS8

Compatible pipe materials

Metal or plastic tubes (flexible or rigid)*1

Compatible fluids

Liquids (water, oil, glue, fat, chemical solutions, etc.)*1

Admitted fluid temperature

0°C (unfrozen on the surface of the tube) to 100°C (surface temperature of the tube)

Model of the clutch assembly

Other, of a width of >= 10 mm

The following information is provided by the manufacturer:

Other, of a kind used for the manufacture of goods of heading 8102

FD-XC8M*2

The nominal flow rate

The outer diameter of the tube ø6 0,24",1/4 (6,35 mm): 0 to 3000 mL/min
External diameter of the tube ø8 0,31': 0 to 8000 mL/min

The following is the list of the following:

Other, including:*3(variable by default)

Resolution of the screen

Instant flow rate

0,1/1/10 mL/min (shown on the controller)

Number of catches

0,001/0.01/0,1/1 mL (shown on the controller)

Repeatability

Other, of a width of not more than 30 mm

The time of response: 50 ms

FS

± 0.1%*4*5

Instant flow rate

The diameter of the tube ø6 is 0,24", 1/4 (6,35 mm): ± 3 mL/min
The outer diameter of the tube ø8 0,31': ± 8 mL/min*4*5

The time of response: 500 ms

The diameter of the tube ø6 is 0,24", 1/4 (6,35 mm): ± 1,0 mL/min
The following shall be added to the list of the following:*4

Other, of a kind used for the manufacture of goods of heading 8102

The time of response: 50 ms

FS

The outer diameter of the tube ø6 0,24", 1/4 (6,35 mm): ± 0,3%
The outer diameter of the tube ø8 0.31": ± 0.15%*4*5

Instant flow rate

The diameter of the tube ø6 is 0,24", 1/4 (6,35 mm): ± 9 mL/min
The outer diameter of the tube ø8 0,31': ± 12 mL/min*4*5

The time of response: 500 ms

The diameter of the tube ø6 is 0,24", 1/4 (6,35 mm): ± 2,9 mL/min
The following shall be added to the list of the following:*4

Other, including

Variable

The integrated unit display

The test chemical shall be used to determine the concentration of the test chemical.

Method of deployment

State indicator

Environmental resistance

Degree of protection

The following information is provided by the Commission in the Official Journal of the European Union:*6

The temperature of the room

-10 to 60°C (without freezing) 14 to 140oF

Relative humidity

35% to 85% of HR (without condensation)

Vibration resistance

10 to 55 Hz, double width of 1.5 mm 0.06", 2 hours for each of the directions X, Y, Z

Stroke resistance

50 G 11 ms, 3 times for each of the addresses X, Y, Z

Other materials

Head

The head structure: PPS/PPSU, amplifier with input cable: PPS, cable: PVC, connector of the controller: PPS/PBT/POM

Game of cuddles

For the plastic tube

Structure, fastener: PPS, detection surface: special rubber, tube support rubber: FKM, head fastener: SUSXM7

For the metal pipe

Metal: SUS304/SUSXM7, detection surface: special rubber, rubber for the clutch support: FKM, head fastening screw: SUSXM7

Weight

Approximately 250 g


Products Related