Castrol Optigear Synthetic A 320, 208-Ltr-Drum
Tweet
Follow @ADJDiTec
.
Bu üründen fiyat teklifi almak isterseniz, lütfen aşağıdaki düğmeye tıklayabilirsiniz.
Fiyat Teklifi Talep Etmek
Castrol Optigear Synthetic A are fully synthetic high performance gear oils with PD (plastic deformation) technology. They offer optimum wear protection under extreme thermal loads and the most severe operating conditions such as high loads, vibration, oscillation and shock loads. The wide temperature application range, especially at low start-up temperatures, and the high load-carrying capacity particularly characterize these industrial gear oils. Thermally and mechanically stable polyalphaolefin and PDAdditivation (plastic deformation) adapt to changing operating conditions and actively prevent wear. The surface quality is optimized in a wear-free manner.ApplicationCastrol Optigear Synthetic A high performance gear oils are suitable for use in particularly highly loaded industrial gears, with large temperature fluctuations and highest loads, wind turbines, conveyor belts, crane gears, elevators, rolling mills. They can be used for highly loaded eccentrics, gear couplings, chain drives, drives and joints of robots and for positive power transmission as well as for all plain and roller bearings, especially also tapered roller bearings in extruders, vibrating screens, vibrators or for screw presses. Castrol Optigear Synthetic A are suitable for transport systems in winter operation, especially for arctic countries such as Canada, North America and Scandinavia.Remarks on applicationThe viscosity specified by the machine manufacturer must be observed. Castrol Optigear Synthetic A is miscible with all mineral oil based gear oils. Full effectiveness is only achieved when used unmixed. Castrol Optigear Synthetic A gear oils are CLP-HC lubricating oils marked according to DIN 51502 and exceed the minimum requirements according to DIN 51517-3.Advantages
Good viscosity-temperature behavior
Wide temperature application range
Excellent low-temperature behavior, easy start-up, good flowability at extremely low temperatures
Optimum wear protection
Reduction of pitting and scoring
Particularly low coefficient of friction, thus reducing energy costs
Reduction of oil temperatures
Significantly extended oil change intervals
Reduction of maintenance costs
Shear stable
High corrosion protection
Benzer Ürünler
-
Göstermek
Ayrıntılar
BASECUT 150mm Grip 15H P120, Quality 120, 100/Pack
-
Göstermek
Ayrıntılar
1SAX331001R1101 EF65-70 Electronic overload relay
-
Göstermek
Ayrıntılar
1SFL511001R3622 contactor A 210-30-22 190/50 220/60 Hz
-
Göstermek
Ayrıntılar
MANGO ROTA EJE L=296 ABB_1SDA054929R0001
-
Göstermek
Ayrıntılar
3M Lid for mixing cup, 2.300 ml (box=180 pcs.)
-
Göstermek
Ayrıntılar
Copper tip for 39-M rotor blade