FS-V12P Photoelectric Sensor

Model

FS-V12P

Type

1-Line Expansion Unit

Emission

PNP

Light Source

Red LED

Response Time

250 µs (FINE) / 500 µs (TURBO) / 1 ms (SUPER TURBO)

Operating Mode

Light-ON/Dark-ON (Selection by selector)

Indicator Lamp

• Display Indicator: Red LED
• Digital LED Monitor: Seven segments, four digits, red LED.
• Bar LED Monitor: One orange LED and six green LEDs.

Timer Function

ON Delay: 40 ms, OFF Delay: 10 ms, Timer OFF (Selection by selector)

Signal Output

Open-Collector PNP 100 mA max. (24 VCD max.), Residual Voltage: 1 V max.

Protection Circuit

• Reverse Polarity Protection
• Overcurrent Protection
• Transient Protection

Expansion Units

Up to 16 expansion units can be connected (for a total of 17 units). *1

Mutual Interference Suppression

FINE: 4, TURBO/SUPER: 8

Rated Value

Power Supply Voltage

12 - 24 VCD ±10%, Ripple (P-P) 10% or less *2

Current Consumption

50 mA or less

Environmental Resistance

Ambient Light

Incandescent Light: 10,000 lux max., Sunlight: 20,000 lux max.

Ambient Temperature

-10 to +55 °C (14 to 131 °F) (No freezing)

Relative Humidity

35 to 85% HR (No condensation)

Vibration Resistance

10 to 55 Hz, Double Amplitude 1.5 mm (0.06"), 2 hours in each of the X, Y, and Z directions

Shock Resistance

500 m/s *2, 3 times in each of the X, Y, and Z directions

Structure Material

Polycarbonate

Weight

Approx. 45 g