KEYENCE LK-503
- Code / Model:
- Manufacturer: Keyence
- Department:
- Category of products:
- Sub-category: Automation and control
- You've seen it before.: 1
|
Model of the |
Other goods of heading 0301 |
|||
|
The guy |
Sensor head Long distance*1Sensor head |
|||
|
Measurement method |
High precision mode, Long range mode |
|||
|
The reference distance |
The following is the list of the categories of vehicles that are subject to the approval procedure: |
|||
|
Measurement range |
The following is the maximum value of the product: |
|||
|
Light source |
The guy |
Red visible semiconductor laser |
||
|
Wavelength |
690 nm |
|||
|
The emission |
Other electricity |
|||
|
Laser |
The Commission shall adopt delegated acts in accordance with Article 21 of Regulation (EC) No 1024/2009. |
Class 2 laser product |
||
|
The following information shall be provided: |
||||
|
The diameter of the light point |
The following is the list of the types of vehicles that are used in the manufacture of the product: |
|||
|
Linearity |
±0.1% of the total scale*2 |
|||
|
Repeatability |
10 μm*3The following is the list of the types of products used:*3The following is the maximum value of the vehicle: |
|||
|
The following is the list of the following: |
The voltage output |
The following conditions shall apply:*4(High precision mode), |
||
|
The following table shows the following: |
Impedance |
100 Ω |
||
|
The following is the list of the following: |
Power outlet |
The following conditions shall apply: |
||
|
Alarm output |
NPN: 100 mA maximum (40 V maximum) (N.C), residual voltage 1 V maximum |
|||
|
Sampling cycle |
The following is the list of the following: |
|||
|
Other functions |
The following information shall be provided: |
|||
|
Characteristics of temperature |
0,02% of the total scale/°C |
|||
|
The nominal value |
Power voltage |
Of a width of 24 VCD ± 10%, undulation (P-P) of 10%, or less |
||
|
Classification of the products |
Maximum current consumption |
400 mA maximum |
||
|
Environmental resistance |
Degree of protection |
Other, not further worked than cutting |
||
|
Environmental light |
Incandescent or fluorescent lamp: 10,000 lux max. |
|||
|
The temperature of the room |
From 0 to +50 °C 32 to 122 °F (without condensation) |
|||
|
Relative humidity |
35 to 85 % HR (without condensation) |
|||
|
Vibration resistance |
10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the directions X, Y and Z |
|||
|
Other materials |
Aluminium substituted |
|||
|
Weight |
Approximately 700 g (including cable) |
|||