Fiber Amplifier FS-V31 Keyence
- Code / Model:
- Manufacturer: Keyence
- Department: Automation and control of processes
- Category of products: Industrial sensors
- Sub-category: Fiber optic sensors
- You've seen it before.: 22
Model
FS-V31
Type
1 Wired Output
Emission
NPN
Main Unit/Expansion Unit
Unit
Signal Output
- 1 Output
Monitor Output (1 to 5 V)
N/A
External Input
- Connector -
Light Source
4-element Red LED (Wavelength: 640 nm)
Response Time
33 s (HIGH SPEED)/250 s (FINE)/500 μs (TURBO)/1 ms (SUPER TURBO)/4 ms (ULTRA TURBO)/16 ms (MEGA TURBO)
Output Selection
Light-ON/Dark-ON (Selection by Selector)
Display Indicator
Operating Indicator: Red LED / Dual Digital Monitor: Double 7-segment Display, Set Value (4-digit Green LED indicator) and Target Value (4-digit Red LED indicator). Current Value Range: 0 to 64,512; Excess Gain: 0P to 999P, Retention Function: It is possible to view the peak and minimum retention values. Selectable between 5 variations / LED Bar Monitor: Excess Gain Shown (85% to 115% in 7 Steps), Scale Presentation
Detection Mode
Light Intensity (Area Detection Possible, Automatic Sensitivity-Tracking Function Included)
Timer Function
- Activation Delay Timer / Deactivation Delay Timer / Single Shot Timer / Timer + Deactivation Delay Timer / Timer + Single Shot Timer
Selectable Timer Duration: 0.1 to 9,999 ms, Maximum Error Regarding Set Value: 10% Max.
Signal Output
Open Collector NPN 24 V, 100 mA Max.*1 (Main Unit Only)/20 mA Max. (When Expansion Unit(s) is/are Connected), Residual Voltage: 1 V Max.
External Input
Input Time: 2 ms (ON)/20 ms (OFF) Min.*2
Expansion Units
Up to 16 expansion units can be connected (a total of 17 units). Note that the type with 2 outputs should be counted as two units.
Number of Interference Prevention Units
Normal Operation: HIGHSPEED:0 FINE:4 TURBO/SUPER/ULTRA/MEGA:8台
Size
30.3 mm (Height) x 9.8 mm (Width) x 71.8 mm (Depth) / 1.19" (Height) x 0.39" (Width) x 2.83" (Depth)
Classification
Power Supply Voltage
12 to 24 VCD (±10%), Residual Ripple Ratio (P-P) 10% Max. Class 2
Power Consumption
Normal: 710 mW Max. (Using 24 V, 29 mA Max., Using 12 V, 40 mA Max.)/Energy Saving: 540 mW Max. (Using 24 V, 22 mA Max., Using 12 V, 28 mA Max.)*3
Environmental Resistance
Ambient Illumination
- Incandescent Lamp: 20,000 lux Max.
- Sunlight: 30,000 lux Max.
Operating Ambient Temperature
-10 to +55°C / 14 to 131°F, No Freezing *4
Operating Ambient Humidity
35 to 85% HR (No Condensation)
Shock Resistance
500 m/s2 in the X, Y, and Z directions, 3 times respectively
Vibration
10 to 55 Hz, Double Amplitude: 1.5 mm / 0.06", 2 hours each on the X, Y, and Z axes
Structure Material
Polycarbonate
Accessories
N/A
Weight
Approx. 80 g