Keyence PZ-M51 Sensor fotoeléctrico con amplificador integrado
- Code / Model:
- Manufacturer: Keyence
- Department:
- Category of products:
- Sub-category: For the purposes of headings 8703 to 8704, the following definitions shall apply:
- You've seen it before.: 1
|
Model of the |
Other, of a kind used for the manufacture of goods |
|||
|
The guy |
Barrier |
|||
|
The emission |
NPN |
|||
|
The following information shall be provided: |
10 m 32.8'*1 |
|||
|
The following is the list of the following: |
- What ? |
|||
|
Light source |
Red LED |
|||
|
Sensitivity adjustment |
Power meter of one turn (230°) |
|||
|
Response time |
1.5 ms maximum |
|||
|
Method of operation |
The following information shall be provided: |
|||
|
The indicator lamp |
Output and power: orange LED, stable operation: green LED*2 |
|||
|
Control outlet |
100 mA (24 V) maximum, residual voltage: 1 V maximum |
|||
|
Digital display |
- What ? |
|||
|
Protective circuit |
Reverse polarity, overcurrent protection, transitional |
|||
|
The nominal value |
Power voltage |
Of a width of 12 to 24 VCD ± 10%, undulation (P-P) of 10%, or less |
||
|
Classification of the products |
Energy consumption |
E: 24 mA maximum , R: 27 mA maximum |
||
|
Environmental resistance |
Degree of protection |
Other, not further worked than cutting |
||
|
Environmental light |
The amount of the energy from the use of the energy from the fuel shall be calculated as follows: |
|||
|
The temperature of the room |
From -20 to +55 °C -4 to 131 °F (without freezing) |
|||
|
Relative humidity |
35 to 85 % HR (without condensation) |
|||
|
Vibration resistance |
10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the directions X, Y and Z |
|||
|
Stroke resistance |
The following conditions shall apply:2, 6 times in each of the directions X, Y and Z |
|||
|
Structural material |
Other, of a width of >= 10 mm |
|||
|
Other machinery |
- What ? |
|||
|
Weight |
E: Approximately 50 g, R: Approximately 55 g (including 2 m 6.6' cable) |
|||