Model

LT-9001H

Measurement Unit Compatibility

Measurement units can be exchanged without factory recalibration.

Display

Minimum Displayable Unit

• 0.1 µm *1
• 1 µm *2
• 0.01°

Display Range

• ±9,999.99 µm, ±999,999 µm *2
• 9,999.99°

Microscope Function

―

Presentation Cycle

10 times/s *2

Terminal Block

Analog Output

±10 V x 2 outputs, output impedance: 100 Ω

Timer Input

Voltage-free input

Reset Input

Auto-Zero Input

Dedicated Monitor Power Supply

24 VCD *3

Control I/O

Evaluation Mode

• 3-stage limit output for OUT1, OUT2 and NPN open-collector output *4

Binary Mode

• Binary output
• Measurement data output (21 bits), selectable OUT1/OUT2/PROFILE, NPN open-collector output *4

Synchronization Output

• NPN open-collector output *4

Binary Selector Output

• Binary selection input
• Voltage-free input *4

Stability Output

• NPN open-collector output

Remote Laser Input

• Voltage-free input

Program Switching Input

• Voltage-free input x 3 inputs

RS-232C Interface

• Measurement data output and control I/O (selectable up to maximum speed of 115,200 bps.)

Video Output

• NTSC format compatible (PIN connector)

Main Functions

Displacement Mode

• Distance measurement, thickness measurement of transparent objects, angle measurement, relative angle measurement, surface selection, darkness disable, mask, graphic trend display and interval/scan width change *5

Profile Mode

• Area selection (average, maximum, minimum, from maximum to minimum, area), zone calculation, interval/scan width change, darkness disable, smoothing, average and profile data output *6

Common

• Light intensity accumulation, microscope (only for LT-9501H, LT-9501HSO (5654)), tolerance criterion, 8 program memory, calibration, average, hold modes, auto-zero and interface language selection

Rated Value

Power Supply Voltage

100 to 240 VAC ±10 %, 50/60 Hz

Classification

Power Consumption

110 VA or less

Ambient Resistance

• Pollution Degree: 2
• Overvoltage Category: II

Operating Temperature

0 to +35 °C (32 to 95 °F)

Relative Humidity

35 to 85 % HR (No condensation)

Weight

Approx. 2.4 kg

*1 The display changes every ±0.3 µm.

*2 Varies depending on the setting.

*3 Dedicated power supply for the monitor specified by KEYENCE.

*4 Select between limit mode or binary mode.

*5 Select between Distance Mode or Profile Mode (only Distance Mode is available with LT-9501HSO (5654) and LT-9001HSO (5655)). Rated value of the NPN open-collector output: 30 mA max. (30 V max.), residual voltage of 0.5 V. Rated value of the voltage-free input is 1 V or less ON voltage, 0.6 mA or less OFF current.

*6 Select between Distance Mode or Profile Mode (only Distance Mode is available with LT-9501HSO (5654) and LT-9001HSO (5655)). Rated value of the NPN open-collector output: 30 mA max. (30 V max.), residual voltage of 0.5 V. Rated value of the voltage-free input is 1 V or less ON voltage, 0.6 mA or less OFF current.