GT2-E3N Model Specifications

Emission

Output NPN

Mounting Method

Installed in the GT2-100N/100P (up to 3 cards)

Main Unit/Expansion Unit

-

Power Consumption

• Normal: 4,200 mW max. (30 V, 140 mA max.) *1
• Vermogen sparen (eco): 4,000 mW max. (30 V, 133.3 mA max.)

Display Power

Measured display value -

Other Display

• Display range -
• Display resolution -
• Sampling rate: 1,000 times/sec.

Control Inputs

• Synchronization/reset/Reset input/bank
• Non-voltage input

Control Output

HH/HI/GO/LO/LL. Collector open NPN, 40 V 50 mA or less *2, residual voltage 1 V or less

Response Time

hsp (3 ms), 5 ms, 10 ms, 100 ms, 500 ms, 1 s

Environmental Resistance

• Ambient temperature: -10 to +50 °C (14 to 122 °F)
• Relative humidity: 35 to 85 % HR (No condensation)

Vibration Resistance

10 to 55 Hz, Double amplitude 1.5 mm (0.06"), 2 hours in each of the X, Y and Z directions

Materials

• Main frame: Polycarbonate, Keyboard: Polyacetal, Front: PET

Power Supply/I/O Cable

Power supply: Terminal block, I/O: 30-pin connector (MIL standard)

Weight

Approx. 80 g

*1 For the GT2-100 Series, when the maximum number of heads is connected and all units are set to power saving mode.

*2 With 2 or more heads connected, 20 mA or less.