Model of the

Other, including:

The guy

DIN railway assembly

The following is the list of the main units/expansion units:

Main unit

The following table shows the following:

Yes, I did.

Electricity consumption
(including the exit of
(Analog current)

It 's normal .

2700 mW or less (at 30 V: 90 mA or less)^*1

The energy efficiency of the system shall be determined by the following criteria:

2300 mW (at 30 V: 77 mA or less)^*1

The energy efficiency of the system shall be determined by the following criteria:

2200 mW (at 30 V: 74 mA or less)^*1

The method of digital display

7 second dual display
Upper level: Red, five digits
Lower level: Green, 5 digits

The following information is provided:

-99.999 to +99.999, -99.99 to +99.99, -99.9 to +99.9, -99 to +99 (selectable)

Screen resolution

1 μm 0,04 Mil, 10 μm 0,39 Mil, 100 μm 3,94 Mil, 1,000 μm 39,37 Mil (selectable)

Out of the way

The outcome of the evaluation shall be as follows:
(selectable between NPN and PNP)

NPN (PNP) open collector x3 c., 30 VCD (power voltage) or less, residual voltage 1 V (2 V) or less,
N.O./N.C. selectable 50 mA/c. maximum^*2

The Commission shall adopt implementing acts in accordance with Article 21 of Regulation (EU) No 1308/2013.

The following is the list of the following:^*3

Exit from edge verification
(selectable between NPN and PNP)

NPN open collector (PNP) x1 c., 30 VCD (power voltage) or less, residual voltage 1 V (2 V) or less,
N.O./N.C. selectable 50 mA maximum,^*2Response time 20 ms

The following table shows the following:
(selectable between ±5 V, 1-5 V,
0-5 V, 4-20 mA)

The voltage output

The output range

±5 V (background of scale 10 V)

The output resistance

100 Ω

Maximum load resistance

- What ?

Repeating accuracy

± 1 mV

Precision display

±0.05 % of E.T.

The temperature characteristics

0,005 % of E.T./°C

The updating cycle

Same as the head sampling cycle

Response time

The same as the response time (output of valuation)

Time constant

10 μs (90% response)^*4

Power outlet

The output range

4-20 mA (background of scale 16 mA)

The output resistance

- What ?

Maximum load resistance

Other, not further worked than hot-rolled

Repeating accuracy

The following is the list of the following:

Precision display

±0.25% of E.T.

The temperature characteristics

0.01% of E.T./°C

The updating cycle

Same as the head sampling cycle

Response time

The same as the response time (output of valuation)

Time constant

30 μs (90% response)^*4

Entry

Income from the sale

The time of input: 20 ms or more, response delay: 120 ms or less (permanent memory (EEPROM) 1.5 s or less)

Re-adjustment input

Input time: 20 ms or more, Response time: 20 ms or less

Timer entry

Time of entry: 2 ms or more, Response time: 2 ms or less

Exchange rate entry to zero

Input time: 20 ms or more, Response time: 20 ms or less

Bank entry A/B Bank entry

Input time: 20 ms or more, Response time: 20 ms or less^*3

Entry to stop the laser emission

Time of entry: 2 ms or more, Response time: 2 ms or less

The nominal value

Power voltage

10 - 30 VCDs including P-P 10%, Class 2 or LPS

Environmental resistance

Degree of pollution

2

The temperature of the room

From -10 to +50 °C 14 to 122 °F (without freezing)

Relative humidity

35 to 85 % HR (without condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours on each of the X, Y and Z axes

Other materials

The main unit box/front layer: polycarbonate, plaster: polyethylene, cable: PVC

Other machinery

Main structure × 1, Manual of instructions × 1

Weight

Approximately 150 g (including elements)