Keyence FS-N43N Unidades amplificadoras Tipo de cable Unidad principal NPN
- Code / Model:
- Manufacturer: Keyence
- Department:
- Category of products:
- Sub-category: Machinery and accessories
- You've seen it before.: 1
|
Model of the product |
Other, of a kind used for the manufacture of goods |
|||
|
Type |
Cable |
|||
|
Output |
NPN |
|||
|
Main unit/expansion unit |
Main unit |
|||
|
Response time |
The following information is provided for in the Annex to Implementing Regulation (EU) No 1308/2013:*1*2The following information is provided:*3The Commission shall adopt delegated acts in accordance with Article 21 of Regulation (EC) No 1907/2006 laying down the rules for the application of this Regulation. |
|||
|
Number of control outputs |
2 |
|||
|
Number of external inputs |
1 |
|||
|
Light source LED |
Transmitter side: Red, four-element LED (wavelength: 660 nm) |
|||
|
Control of output |
Open-collector, 30 V or less 100 mA or less per output, |
|||
|
External input |
Input time: 2 ms (ON) /20 ms (OFF) or longer*4 |
|||
|
Unit expansion |
Up to 16 units (17 units connected in total including the main unit) . However, each dual output type will be treated as two expansion units. |
|||
|
Protection circuit |
Protection against reverse power connection, output overcurrent, output surge, and reverse output connection |
|||
|
The Commission shall adopt delegated acts in accordance with Article 21 of this Regulation. |
S-HSPD/HSPD: 0 units, FINE: 4 units, TURBO/SUPER/ULTRA/MEGA/TERA: 8 units (The mutual interference prevention values are twice those shown here when Double is set.) |
|||
|
Power supply |
Power voltage |
10 to 30 VDC (including 10 % ripple (P-P) or less), class 2 or LPS*5 |
||
|
Power consumption |
During normal operation: 870 mW or less (34 mA or less at 24 V/62 mA or less at 12 V) |
|||
|
Environmental resistance |
Environmental light |
Incandescent lamp: 20,000 lx or less, sunlight: 30,000 lx or less |
||
|
Environmental temperature |
-20 °C -4 °F to +55 °C +131 °F (not freezing)*7 |
|||
|
Vibration resistance |
10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours each for X, Y, and Z axes |
|||
|
Shock resistance |
Other electrical equipment2; 3 times each for X, Y, and Z axes |
|||
|
Other articles of iron or steel |
Main unit and cover: polycarbonate |
|||
|
Weight |
Approximately 83 g |
|||