Conductive Level Controller CLD2EA1C115
- Code / Model: CLD2EA1C115
- Manufacturer: Carlo Gavazzi
- Department: Automation and control of processes
- Category of products: Industrial sensors
- Sub-category: Level controllers
- You've seen it before.: 5
Carlo Gavazzi CLD2EA1C115 Conductive Level Sensor
The CLD2EA1C115 conductive level sensor from Carlo Gavazzi is a device designed to control the level of liquids in tanks and containers. It uses low-voltage AC electrodes to detect the presence or absence of liquid, activating relays that can be used to control pumps, alarms, or other functions.
Technical Features
- Model: CLD2EA1C115
- Type: 2-point conductive level controller with potentiometer
- Power Supply: 115 VAC
- Sensitivity Range: 250 ohm - 500 Kohm
- Outputs: 2 DPDT (Double Pole Double Throw) relay outputs
- Output Current: 8A per relay
- Output Voltage: 250 VAC
- Mounting: DIN rail
- Function: Fill-empty
- Dimensions: 35.5x81x60.2mm
- Protection Rating: IP20
Description
The CLD2EA1C115 uses low-voltage AC electrodes to detect the presence or absence of liquid in a tank. The sensor's sensitivity is adjusted using a potentiometer, allowing for precise configuration for different applications.
The device features two DPDT relay outputs that can be used to control pumps, alarms, or other functions. The outputs are designed to handle up to 8A at 250VAC.
Applications
- Liquid tank level control
- Fill and empty detection
- Low or high level alarm
- Pump and valve control
Note
- The information provided is based on available data. For specific product details, please refer to the manufacturer's technical sheet.
