Model N-R4

This document outlines the specifications for the Model N-R4.

Interface

RS-422A/485

Power Supply of Code Reader

5 VCD ±5% (650 mA)

Terminal Block

Input

• Number of inputs: 2 inputs (IN1 and IN2)
• Type of input: Bidirectional voltage input
• Maximum nominal value: 26.4 VCD
• Minimum voltage in ON: 15 VCD
• Maximum current in OFF: 1 mA

Output

• Number of outputs: 4 outputs (OUT1 to 4)
• Type of output: Photo MOS relay output
• Nominal load: 30 VCD, 100 mA
• Leakage current in OFF: OFF: 0.1 mA or less
• Residual voltage in ON: 1 V or less

Communication Specifications

• Head port number: 1 (12-pin round connector)
• Supported communication standards: Compliant with RS-232C
• Communication speed: 4,800, 9,600, 19,200, 31,250, 38,400, 57,600, 115,200 bps
• Number of data bits: 7/8 bits
• Number of stop bits: 1/2 bits
• Parity control: None/Even/Odd
• Communication standard: Solid-state: NPN open-collector 100 mA max. (40 V max.)

Connector

1 (removable 5-pole connector)

Output Interface

Total extension length: 1.2 km (0.75 miles) or less

Nominal Value

• Power supply voltage: 24 VCD +10%, -20%
• Current consumption: 380 mA or less

Environmental Resistance

Operating Environment

• No presence of dust or corrosive gases
• Ambient temperature: 0 to +50 °C (32 to 122 °F) (No freezing)

Storage Temperature

-20 to +60 °C (-4 to 140 °F) (No freezing)

Relative Humidity

35 to 85% HR (No condensation)

Vibration Resistance

10 to 55 Hz, Double Amplitude 1.5 mm (0.06"), 2 hours in each of the X, Y and Z directions

Weight

Approx. 135 g (excluding connector)