(+34) 951 152 505 | info@adjditec.com

ADJ DiTec Málaga S.L
  • Principal
  • Entreprise
    • Politique d'égalité
    • Politique des fournisseurs
    • Politique environnementale
    • Responsabilité écologique.
    • Légal.
    • Protection des données.
  • Services
  • Produits
    • Liquidation.
    • Fabricants
    • Catégories
    • Catalogues
  • Nouvelles
  • Contact.
  • Principal
  • Produits
  • 67eff257-a51d-11ef-864f-5404a6f3ca70

INTERFACE MULTIPLEXER HART HRM2008

Catégorie : : Componentes de control
Fabricant : Schneider Electric
Code : : -
Tweet Follow @ADJDiTec
.

Nombre no disponible.

Si vous souhaitez une demande de devis pour ce produit, veuillez cliquer sur le bouton suivant.

Demander des prix

Specification Description Part number: HRM2008 Supply for HRM2008 24V DC (+/-10%) @ 500 mA Auxiliary input 24 VDC Supply for individual DC/DC converters Auxiliary Input Power Supply connections provided for powering field devices via 8 individual 24V DC-DC converter @ 500mA Built-in 24 DC/DC converter Maximum 1 Watt @ 24 V DC per Channel Continuous Short-Circuit Protection Communication Ports: 1. Two RJ45 ports –Embedded switch. • Usage: - Embedded Web Page for Diagnostics, Ethernet setup - Modbus TCP/IP Data Access - HART OPC access - Asset Management Software 2. One Removable 5-pin Terminal Block– RS485, HART™ pass-through. • Usage: - Asset Management Software and HART OPC access - 16 devices maximum without repeater. Field Wire Requirements 0.5….1.5 mm2 (24……16 AWG). Isolation Minimum 1 KV isolation between power supply and communication ports Indication 1. LED1: for HART™ ‘Pass-Through’ communication status LED (Yellow) 2. LED2: for HART™ communication status LED (Yellow ) 3. LED3: Ethernet communication status LED (Yellow ) 4. LED4: Module OK/Scanning Status LED (Green ) 5. CH1-8 Over Current Fault Indication (30 mA) (Red ) Isolation • HART™ channels are transformer isolated. (1.5KV between HART™ modem and HART™ field device) • Polarity independent connection on the HART™ side. • 30V DC isolation Channel to Channel. No. of HART™ Device per Channel 1 device per channel. HART™ Protocol Revision 6 supported. Secondary master device is supported. (i.e.: handheld configuration tool) Module Configuration Configuration via Ethernet port using embedded Web Pages (HTTP) DIP switches SW1 ON Position: 250 ohm termination disabled DIP switches SW2 ON Position: Filtering enabled DIP switches SW3 ON Position: without analog I/O Dimensions 155mm X 47 mm X 48mm Operating Temperature 0 to 60ºC Storage Temperature -20°C to +80°C, non-operating Operating Humidity 10 - 90%, non-condensing Compliance CE, cUL, RoHS, WEEE


Produits similaires

  • MONTRER Détails.
    MANÓMETRO MGS18/2/A DN100 CAMPO ESCALA 0...25 BAR, CONEXIÓN AL PROCESO 1/2
    MANÓMETRO MGS18/2/A DN100 CAMPO ESCALA 0...25 BAR, CONEXIÓN AL PROCESO 1/2" GAS MACHO, MONTAJE DIRECTO Nuova Fima
  • MONTRER Détails.
    CONTACTO AUXILIAR 1NA+1NC SIEMENS 3RH292
    CONTACTO AUXILIAR 1NA+1NC SIEMENS 3RH292
  • MONTRER Détails.
    CONTROLLOGIX HIGH CAPACITY ETHERNET/IP MODULE - TP Allen Bradley 1756-EN2T
    CONTROLLOGIX HIGH CAPACITY ETHERNET/IP MODULE - TP Allen Bradley 1756-EN2T
  • MONTRER Détails.
    MANOMETRO D150 1/2
    MANOMETRO D150 1/2" NPT M NUOVA FIMA MGS-18-2-A 0-16 bar
  • MONTRER Détails.
    6ES7972-0AA02-0XA0 Siemens Profibus Repetidor
    6ES7972-0AA02-0XA0 Siemens Profibus Repetidor
  • MONTRER Détails.
    Control para procesos Eliwell ICPLUS 902 J/K PT100
    Control para procesos Eliwell ICPLUS 902 J/K PT100

Produits phares
  • 3KL5740-1GG01 SIEMENS
    3KL5740-1GG01 SIEMENS
  • DM6363X1-B2 Emerson Mux Termnation
    DM6363X1-B2 Emerson Mux Termnation
  • Schneider Electric AS-8533-003 AS 8533 I_O ANALOG CONNECTOR SET - 984 Series
    Schneider Electric AS-8533-003 AS 8533 I_O ANALOG CONNECTOR SET - 984 Series
  • G5X MONTAJE BRIDA SICAME PARA CABLES
    G5X MONTAJE BRIDA SICAME PARA CABLES
  • Mini-Solid-Relais OPT-24DC/24DC/2
    Mini-Solid-Relais OPT-24DC/24DC/2

Produits Aléatoires
  • Sensor de 200A, diámetro 17 mm.
    Sensor de 200A, diámetro 17 mm.
  • GP006127
    GP006127
  • V100 2.6 MW VCS V100 2.6 MW VCS
    V100 2.6 MW VCS V100 2.6 MW VCS
  • V100 2.6 MW VCS V100 2.6 MW VCS
    V100 2.6 MW VCS V100 2.6 MW VCS
  • Caja de conexiones ABB 00846, Termoplástico, Gris, 100mm, 100mm, 50mm, 100 x 100 x 50mm, IP65
    Caja de conexiones ABB 00846, Termoplástico, Gris, 100mm, 100mm, 50mm, 100 x 100 x 50mm, IP65

Demander des prix

Nombre no disponible.

Conformément à la Loi organique 15/1999 du 13 décembre relative à la protection des données à caractère personnel, nous vous informons que vos données sont inscrites dans un fichier appartenant à ADJ DiTec Málaga S.L., dûment enregistré au Registre général de l'Agence espagnole de protection des données. Ces données ne seront utilisées qu'à des fins de vous fournir des informations sur nos services. En aucun cas, ces données ne seront utilisées à d'autres fins ni cédées à des tiers, conformément aux principes de protection des données énoncés dans la loi 15/1999 du 13 décembre relative à la protection des données à caractère personnel. Si vous ne souhaitez plus recevoir d'informations commerciales, veuillez nous en informer par le même canal de communication, par écrit adressé à ADJ DiTec Málaga S.L., dont le siège social est situé à MALAGA (MALAGA), C.P. 29006, C/ Bodegueros 21, Local 4, ou par e-mail à l'adresse info@adjditec.com.Obtenez plus d'informations sur notre politique de confidentialité

Bulletin d'informations

Entrez votre adresse e-mail pour vous abonner.

Inscription réussie ! Vous avez été ajouté à notre bulletin d'information.

Contact.

  • Direction. Calle Río Sil, 63, 29196 Málaga

  • Téléphone (+34) 951 152 505

  • Courriel électronique info@adjditec.com

Suivez-nous.

© Droits d'auteur. 2008 - 2025 Tous droits réservés.

Nous vous demandons votre autorisation pour obtenir des données statistiques sur votre navigation sur ce site Web. Accepter. | Plus d'informations.