AP-22A Sensor de presión digital

Catégorie : : Sensores de proximidad ultrasonicos
Fabricant : Keyence
Code : : Capteur de pression numérique AP-22A

Follow @ADJDiTec

Si vous souhaitez une demande de devis pour ce produit, veuillez cliquer sur le bouton suivant.

Model		AP-22A
Type		LED-type digital pressure sensor (positive-pressure [low-pressure] model)
Rated pressure		0 to 1.00 kgf/cm²/0 to 100kPa/0 to 14.5psi/0 to 1.00bar
Fluid type		Air or non-corrosive gases
Type of pressure		Gage pressure
Display		3-digit 7-segment LED (character height: 8 mm 0.315"), display cycle: 5 times/sec.
Repeatability		±1 % of F.S. or less
Response		5 ms
Temperature characteristics		±3 % of F.S. or less of the detected pressure at 25 °C 77 °F within the temperature range of 0 to +50 °C 32 to 122 °F.
Display resolution		0.01 kgf/cm²/1 kPa/0.1 psi/0.01 bar
I/O	Control output	Maximum NPN open-collector output: 100 mA (40 V or less), residual voltage: 1 V or less, 2 outputs
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption	45 mA or less
Environmental resistance	Pressure resistance	5 kgf/cm²
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	100 m/s² (Approx. 10 G), 3 times in each of the X, Y, and Z directions
Material		Front case: polycarbonate, pressure port: die-cast zinc
Weight		Main unit: Approx. 65 g (excluding the cable; Approx. 105 g including the 2 m cable)

Demander des prix