(+34) 951 152 505 | info@adjditec.com

ADJ DiTec Málaga S.L
  • Principal
  • Entreprise
    • Politique d'égalité
    • Politique des fournisseurs
    • Politique environnementale
    • Responsabilité écologique.
    • Légal.
    • Protection des données.
  • Services
  • Produits
    • Liquidation.
    • Fabricants
    • Catégories
    • Catalogues
  • Nouvelles
  • Contact.
  • Principal
  • Produits
  • 4a4f0699-b7b5-11ef-8a53-18c04dea56f1

3M Wind Protection Tape Edge Sealer W2600, 50 ml cartridge incl. mixing nozzle

Catégorie : :
Fabricant : 3M Deutschland GmbH
Code : : WS00400025
Tweet Follow @ADJDiTec
.

Nombre no disponible.

Si vous souhaitez une demande de devis pour ce produit, veuillez cliquer sur le bouton suivant.

Demander des prix

3M™ Wind Protection Tape Edge Sealer W2600 is a clear two-component urethane sealer used to smooth and protect the edges of 3M Blade Protection Tape. Adheres to a variety of materials including paints, primers and films Does not yellow High resistance Excellent resistance to environmental influences 3M™ Wind Protection Tape Edge Sealer W2600 is a two-part urethane. It is a clear sealer with excellent durability in external applications. It is supplied in 50 ml dual syringe plastic Duo-Pak cartridges with a 1:1 mix ratio. It can be dispensed with a 3M™ EPX™ Applicator. Smooths and protects the edges of 3M™ Wind Blade Protection Tape and 3M™ Surface Protection Tape. Excellent resistance to environmental exposure. Adheres to a variety of substrates including paints, primers and films. Directions for Use Surface Preparation: For best adhesion, oils, dust, and all other surface contaminants must be completely removed. Dispensing: 3M Wind Protection Tape Edge Sealer W2600 is packaged in DuoPak cartridges and can be dispensed with the 3M™ Scotch-Weld™ EPX™ Applicator. Follow the applicator instructions for assembly, cartridge loading and dispensing the sealer using the 1:1 mix ratio Applicator Plunger. Load the cartridge in the applicator and remove the cap. To ensure adequate mixing, “equalize” the cartridge by expressing adhesive until both both Part A & B are visible. Attach the nozzle and apply the sealant. Properly applied sealant should be transparent with minimal air entrapment. The sealant will begin to set inside the nozzle if it is not dispensed within the working time of the sealant. If the sealant does not flow after a long idle time, remove and replace the mixing nozzle. Estimated length of 30 meters/50 ml cartridge with proper application technique and minimal waste. Notice: Hand mixing is not recommended. Clean-up: Uncured Sealant– Excess uncured  sealant can be removed by wiping with solvent and should be allowed to cure before disposal. Unmixedsealant should be handled and stored per the SDS recommendation. Cured Sealant– Does not require special waste handling procedures. Storage: Store products at 60-80°F (16-27°C) for maximum storage life. Rotate stock on a “first-in first-out” basis. Partially used cartridges can be stored with the nozzle in place. Cured sealant in the nozzle will protect the remaining sealant in the cartridge Shelf Life: These products have a shelf life of 24 months from date of manufacture when stored in the original, unopened container at the suggested storage conditions.   Product data sheetSafety Data Sheet (German)P709079

Produits similaires

  • MONTRER Détails.
    Emergency led lamp with heater 2X11W
    Emergency led lamp with heater 2X11W
  • MONTRER Détails.
    65-125/0,75 B
    65-125/0,75 B
  • MONTRER Détails.
    50-250/2,2 C
    50-250/2,2 C
  • MONTRER Détails.
    Resistor 2.4 Ohm 1000V W/PT100 330
    Resistor 2.4 Ohm 1000V W/PT100 330
  • MONTRER Détails.
    4
    4"WPS 7-4
  • MONTRER Détails.
    A9BSEN22665
    A9BSEN22665

Produits phares
  • 3VA2010-6HN46-0AA0 SIEMENS
    3VA2010-6HN46-0AA0 SIEMENS
  • BATTERY TRAY MOOG, 72V#
    BATTERY TRAY MOOG, 72V#
  • Telemecanique TSX SCM 2000E
    Telemecanique TSX SCM 2000E
  • M12 CONECTOR MACHO 5-POLOS PG 9.
    M12 CONECTOR MACHO 5-POLOS PG 9.
  • Allen-Bradley MASTER MODULE FOR POWERMONITOR
    Allen-Bradley MASTER MODULE FOR POWERMONITOR

Produits Aléatoires
  • Sensor de 200A, diámetro 17 mm.
    Sensor de 200A, diámetro 17 mm.
  • GP006127
    GP006127
  • V100 2.6 MW VCS V100 2.6 MW VCS
    V100 2.6 MW VCS V100 2.6 MW VCS
  • V100 2.6 MW VCS V100 2.6 MW VCS
    V100 2.6 MW VCS V100 2.6 MW VCS
  • Caja de conexiones ABB 00846, Termoplástico, Gris, 100mm, 100mm, 50mm, 100 x 100 x 50mm, IP65
    Caja de conexiones ABB 00846, Termoplástico, Gris, 100mm, 100mm, 50mm, 100 x 100 x 50mm, IP65

Demander des prix

Nombre no disponible.

Conformément à la Loi organique 15/1999 du 13 décembre relative à la protection des données à caractère personnel, nous vous informons que vos données sont inscrites dans un fichier appartenant à ADJ DiTec Málaga S.L., dûment enregistré au Registre général de l'Agence espagnole de protection des données. Ces données ne seront utilisées qu'à des fins de vous fournir des informations sur nos services. En aucun cas, ces données ne seront utilisées à d'autres fins ni cédées à des tiers, conformément aux principes de protection des données énoncés dans la loi 15/1999 du 13 décembre relative à la protection des données à caractère personnel. Si vous ne souhaitez plus recevoir d'informations commerciales, veuillez nous en informer par le même canal de communication, par écrit adressé à ADJ DiTec Málaga S.L., dont le siège social est situé à MALAGA (MALAGA), C.P. 29006, C/ Bodegueros 21, Local 4, ou par e-mail à l'adresse info@adjditec.com.Obtenez plus d'informations sur notre politique de confidentialité

Bulletin d'informations

Entrez votre adresse e-mail pour vous abonner.

Inscription réussie ! Vous avez été ajouté à notre bulletin d'information.

Contact.

  • Direction. Calle Río Sil, 63, 29196 Málaga

  • Téléphone (+34) 951 152 505

  • Courriel électronique info@adjditec.com

Suivez-nous.

© Droits d'auteur. 2008 - 2025 Tous droits réservés.

Nous vous demandons votre autorisation pour obtenir des données statistiques sur votre navigation sur ce site Web. Accepter. | Plus d'informations.