SENSOR DE VIBRACION PCH 1106 MK2 CHF 8737
* Si desea una cotizacion de este producto, puede solicitarlo pulsando el siguiente boton.
SOLICITAR PRECIOSPCH 1026 CHF 8784
Usage:
PCH 1106 Mk2 is designed for permanent monitoring
of unbalance and misalignment problems on
rotating machinery. The sensor measures in mm/s,
m/s² or mm, rms or Pk-Pk, and gives an output in
both mA and voltage relative to full scale (FS).
Some PCH 1106 Mk2 versions measure 0-100 °C or
deliver RAW output as well. The sensor is sensitive
parallel to the length axis.
Mounting:
The PCH 1106 Mk2 is mounted on the surface by
the integrated M8 stud at the bottom of the sensor.
1) Prepare a flat surface of min Ø28 using a top
moulder, which fits in an electrical drill (CHO
1102).
2) Drill and tap a M8x1.25 thread in the centre of
the flat surface. The depth should be min 10
mm (CHO 1103).
3) Use a coupling agent such as Loctite 242/243
or 270 to lock the stud for permanent installation.
4) Tighten the sensor directly to the surface using
3-6 Nm mounting torque.
Productos similares
-
MOSTRAR
DETALLES
ENCHUFE PARED 3P+T 16A 690V
-
MOSTRAR
DETALLES
TARJETA CCU 2.5KHZ MOD VECT
-
MOSTRAR
DETALLES
PISTON D90 MORDAZA SISTEMA GIRO
-
MOSTRAR
DETALLES
SISTEAM-A BH2111 CPU (VPIN) Siemens Gamesa GP012877
-
MOSTRAR
DETALLES
Siemens Gamesa GP128112 BUJE PINTADO AE5X
-
MOSTRAR
DETALLES
TARJETA FLASH CPU PLC PHOENIX CONTACT