Dimensions

Width: 17.5 mm

Height: 99 mm

Depth: 114.5 mm

Environmental Conditions

Ambient Temperature (Operating): -20 °C ... 65 °C

Input Data

• Configurable/Programmable: Yes, preconfigured
• Usable RTD Sensor Types: Pt, Ni, Cu
• Usable TC Sensor Types: U, T, L, J, E, K, N, S, R, B, C, W, HK
• Linear Resistance Range: 0 Ω ... 8000 Ω (freely adjustable, minimum measuring range of 100 Ω)
• Sensor Supply Current: 250 µA (Thermistor)
• Temperature Measuring Range: Dependent on the type of sensor used
• Connection Technique: 2, 3, 4 conductors
• Protection Circuit: Protection against transients, protection against overvoltages 30 V DC
• Connection Type: Screw-on connection

Output Data

• Designation Output: Voltage/Current Output
• Configurable/Programmable: Yes, preconfigured
• Voltage Output Signal: 0 V ... 10 V, 0 V ... 5 V, -5 V ... 5 V, -10 V ... 10 V, 10 V ... 0 V, 5 V ... 0 V, 10 V ... -10 V, 5 V ... -5 V, 1 V ... 5 V
• Current Output Signal: 0 mA ... 20 mA, 4 mA ... 20 mA, 20 mA ... 0 mA, 20 mA ... 4 mA
• Maximum Output Voltage: ± 12 V
• Maximum Output Current: 24 mA
• Output Voltage Range in Case of Cable Breakage: -12 V ... 12 V
• Output Current Range in Case of Cable Breakage: 0 A ... 24 mA
• Output Voltage Range in Case of Exceeding/Not Reaching the Measuring Range: -12 V ... 12 V
• Output Current Range in Case of Exceeding/Not Reaching the Measuring Range: 0 A ... 24 mA
• Load/Output Load Voltage Output: ≥ 10 kΩ
• Load/Output Load Current Output: ≤ 500 Ω
• Ripple: < 20 mV PP
• Protection Circuit: Protection against transients
• D/A Resolution: ± 12 Bit

Output Connection

• Designation Output: Transistor, PNP Output
• Description of the Output: Load capacity 100 mA, switches the supply voltage (not short-circuit resistant); blocked in case of order-specific configuration, otherwise freely programmable via MCR/PI-CONF-WIN
• Output Voltage Range: 18 V DC ... 30 V DC (Switches supply voltage, not short-circuit resistant)
• Constant Load Current: 100 mA

Power Supply

• Supply Voltage: 18 V DC ... 30 V DC
• Maximum Current Consumption: ≤ 60 mA
• Typical Current Consumption: 40 mA

Connection Data

• Connection Type: Screw-on connection
• Minimum Rigid Conductor Section: 0.2 mm²
• Maximum Rigid Conductor Section: 2.5 mm²
• Minimum AWG Conductor Section: 24
• Maximum AWG Conductor Section: 14
• Minimum Flexible Conductor Section: 0.2 mm²
• Maximum Flexible Conductor Section: 2.5 mm²
• Stripping Length: 8 mm
• Screw Thread: M3

General Information

• Maximum Transmission Error: ≤ 0.1 % (of maximum range, ± 6 mV or ± 12 µA at output)
• Maximum Temperature Coefficient: ≤ 0.01 %/K
• Typical Temperature Coefficient: 0.005 %/K
• Maximum Cold Point Error: ≤ 3 K
• Typical Cold Point Error: 1.5 K
• Input/Output Test Voltage: 1 kV (50 Hz, 1 min)
• Input/Power Supply Test Voltage: 1 kV (50 Hz, 1 min)
• Color: Green
• Housing Material: Unreinforced Polyamide PA
• Mounting Position: Discretionary
• Conformity: CE Conformity, UL, USA / Canada (Class I, Div. 2, Groups A, B, C, D or Non-Hazardous Locations), GL (Germanischer Lloyd)