SICK 1222709 WTB26P-24161420A00

Code / Model:
Manufacturer: SICK Optic-Electronic
Department:
Category of products:
Sub-category: Manufacture in which all the materials used are:
You've seen it before.: 1

Description of the product

The following is a list of the characteristics:

The functional principle

The following information shall be provided:

Detailed working principle

Substantial suppression

Distance of switching
The maximum switching distance.	Other, of a thickness of not more than 30 mm
The maximum detection range.	Other, not further worked than hot-rolled
Range of adjustment of the switching threshold for background removal	The following is the list of the products used:
Reference object	Material with a 90% diffuse reflection (referred to as standard white according to DIN 5033)
Minimum distance between the adjusted switching distance and the background (black 6% / white 90%)	120 mm, at a distance of 800 mm
Recommended range of switching distance for better performance	200 mm ... 800 mm

You have broadcast
Light source	Location LED
Type of light	Red visible light
Form of the spot	In the form of a dot
The size of the spot (distance)	Ø 7 mm (700 mm)
Maximum beam dispersion and standardised emission axis (horizontal sweep angle)	The following conditions shall apply:

Characteristic data of the LED
The Commission shall adopt implementing acts in accordance with Article 21 of this Regulation.	The Commission has adopted a number of amendments to the Directive.
The risk group designation of the LED	Free group
Wavelength	Other, of a width of not more than 6 mm
Average useful life	100,000 h with T_U= +25 °C

Adjustment
Other, of a kind used for the manufacture of motor vehicles	BluePilot: For adjusting the switching distance
The following information shall be provided:	For adjusting sensor parameters and Smart Task functions

Indicator
Blue LED	BluePilot: switching distance indicator
Green LED	Service indicator Lighted: lit The following is the list of the following:
Yellow LED	Light reception status Lighted: object present Deactivated: object not present

Technical safety characteristics

MTTF_D

629 years

DC_{of the following:}

0 %

The following information shall be provided:

The following information is provided for in the Annex to Regulation (EU) No 1303/2013.

Rate of utility: 60%

Communication interface

The following information shall be provided:	✔ , V1.1
The data transmission speed shall be the same as the data transmission speed.	COM (98) 374 final Proposal for a Council Regulation (EEC) on the approximation of the laws of the Member States relating to the transport of dangerous goods
Cycle time	2.3 ms
Length of process data	Other information
Structure of process data	The data set shall be reported in the following order:_L1
	The data set shall be reported in the following order:_L2
	Bit 2 ... 15 = empty
The manufacturer	26
The following information is provided:	0x800237
The following information is provided:	Other articles of Chapter 8
Type of master port compatible	A
Support for SIO mode	Yes, I did.

Electrical data

Power supply voltage V_{B. Other}

10 V DC ... 30 V DC^{1) The following:}

The following is a list of the types of rolling stock:

Other, of a kind used for the manufacture of goods_ss

Category of use

The following information is provided in the Annex to Implementing Regulation (EU) No 1095/2012:

The following information is provided by the Commission:

Electricity consumption

≤ 30 mA, Unladen. with U_{B. Other}This is equal to 24 V.

Protection class

The Commission shall adopt implementing acts.

Digital output
Number of the	2 (Anti-epileptic)
The guy	In contrast, the NPP/NPN
The following shall be added to the list of the following:	Approximately._{B. Other}-2.5 V / 0 V
The NPN signal voltage shall be specified in the following paragraphs:	Approximately._V/ < 2,5 V
The following shall be added:_Max.	Other, of a kind used for the manufacture of goods
Exits from protective circuits	Protection against reverse polarization
	Overcurrent and short-circuit proof
Response time	Other, of a kind used for the manufacture of goods^{2) The following:}
Repeatability (reaction time)	Other, not further worked than hot-rolled
Frequency of switching	200 Hz^{3) The following:}

The following conditions shall apply:
Pin 4 / black function (BK)	Digital output, switch in clear, object present → output Q_L1HIGH; communication IO-Link C
Pin 4 / black (BK) function - detail	The sensor pin 4 function is configurable., Other adjustment options via IO-Link.
Pin 2 / white function (WH)	Digital output, dark switching, object present → output _L1Low
Pin 2 / white function (WH) - detail	The sensor pin 2 function is configurable., Other adjustment options via IO-Link.

^{1) The following:}Limit values.
^{2) The following:}Duration of the signal with ohmic load in switching mode.
^{3) The following:}With a clear/dark ratio of 1:1.

Mechanical data

The Commission shall adopt implementing acts.

Rectangular

The following is the list of the dimensions (An x Al x Pr)

Other, of a thickness of not more than 0,15 mm

Connection

Male four-pole connector M12

Other materials
Carcass	Plastic, VISTAL®
Front screen	Plastic, PMMA
Male connector	Plastic, VISTAL®

Weight

Approximately 80 g

Maximum torque of the fastening screws

The following is the list of the following:

Environmental data

Degree of protection	The following information is provided for in the Annex to Implementing Regulation (EU) No 1308/2013: The following information is provided: The following information is provided for in the Annex to Implementing Regulation (EU) No 1308/2013:^{1) The following:}
Operating at room temperature	The following conditions shall apply:
Storage room temperature	The following conditions shall apply:
Resistance to shocks	50 g, 11 ms (25 positive and 25 negative strokes per axis, for X, Y, Z axes; total 150 strokes (EN60068-2-27)) 50 g, 6 ms (5,000 positive and 5,000 negative strokes per axis, for X, Y, Z axes; total of 30,000 strokes (EN60068-2-27))
Resistance to oscillations	10 Hz ... 2000 Hz (amplitude 0,5 mm / 10 g, 20 scans per axis, for X, Y, Z axes, 1 octave/min, (EN60068-2-6))
Humidity of the air	35 % ... 95 %, Relative humidity of the air (without frost)
Authorisation for type of radio equipment	The following information is provided:
Resistance to cleaning products	The following information is provided:
The following information is provided:	The following table shows the following information:

^{1) The following:}It replaces IP69K in accordance with ISO 20653: 2013-03.

Smart Task

Smart task name

Basic logic

Logical function

Directly

And then

The window

Other, including

The time-setting function

Deactivated

Delayed connection

Delayed disconnection

Delayed connection and disconnection

One shot .

The following is the list of the following:

Yes, I did.

Frequency of switching

SIO Logic: 200 Hz^{1) The following:}

The following is the list of the categories of the products:^{2) The following:}

Response time

SIO Logic: 2.5 seconds^{1) The following:}

The following information is provided:^{2) The following:}

Repeating accuracy

The following information is provided for in the Annex to Regulation (EU) No 1303/2013.^{1) The following:}

The following is the list of the following:^{2) The following:}

The following shall be added to the list of the following:
The following shall be added to the list of the following:_L1	Switched output
The following is the list of the following:_L1	Switched output

^{1) The following:}Use of intelligent task functions without IO-Link communication (SIO mode).
^{2) The following:}Use of intelligent task functions with IO-Link communication function.

The following is the list of the following:

State of the device Yes, I did.

Quality of teaching Yes, I did.

Classification of products

The following information shall be provided:	Other articles of apparel
The following information is provided:	Other articles of apparel
The following information is provided:	Other articles of apparel
The following information is provided:	Other articles of apparel
The following information is provided:	Other articles of apparel
eCl@ss 8.0	Other articles of apparel
The following table shows the following:	Other articles of apparel
The following information is provided:	Other articles of apparel
The following information is provided:	Other articles of apparel
The following information is provided:	Other articles of apparel
The following information is provided:	Other articles of apparel
The following information shall be provided:	Other, including:
The following information is provided:	Other, including:
The following information shall be provided:	Other, including:
The following information is provided:	Other, including:
The following information shall be provided:	Other goods