Schneider RXM4AB2P7 RELE 220/230VAC
- Code / Model:
- Manufacturer: Marcas Varias
- Department:
- Category of products:
- Sub-category: Programmable releases
- You've seen it before.: 1
| Product range | Harmony electromechanical rails |
|---|---|
| serial name | Other |
| Type of product or component | Connecting rails |
| Short name of the device | RXM |
| Type and composition of contacts | 4 C/O |
| [Uc] voltage of control circuit | The following is the list of the main components of the engine: |
| State LED | Where |
| Type of control | Lockable test button ((*)) |
| The use factor | 20 per cent |
| shape of the pin | The plan |
|---|---|
| The following shall be added to the list of the following: | 250 V according to the IEC 300 V according to CSA 300 V according to UL |
| [Uimp] Resistance to stress peaks | The following conditions shall apply: |
| Material from contacts | The Commission |
| [I] Nominal current of employment | 3A at 28 V - cable type: DC-1) NC according to IEC 3 A at 250 V - cable type: AC-1) NC according to IEC 6A at 28 V - cable type: DC-1) NA according to IEC 6 A at 250 V - cable type: AC-1) NA according to IEC 6 A in 277 V - cable type: AC-1) according to UL 8A in 30 V - cable type: DC-1) according to UL |
| Continuous output current | 5 A |
| Maximum switching voltage | 250 V according to the IEC |
| Resistive rated load | 6A at 250 V AC 6 A in 28 V direct current |
| Maximum switching capacity | Other electrical equipment |
| Minimum switching capacity | 170 mW at 10 mA, 17 V |
| operation rate | <= 1200 cycles/hour on load The following conditions shall apply: |
| Mechanical durability | 10000000 cycles |
| Electrical durability | 100000 cycles for resistant load |
| average coil consumption in VA | 1.2 at 60 Hz |
| average consumption | 1.2 VA at 60 Hz |
| 9 mm inserted male triangle | >= 0,15 UC |
| operate time | 20 ms |
| release time | 20 ms |
| average coil resistance | 15000 Ohm at 20 °C +/- 15% |
| The following shall be added to the list of the following: | Other electrical equipment |
| safety reliability data | B10d = 100000 |
| Protection category | RT I |
| Test levels | Level In the mode of guide light |
| Operating position | Any position |
| Global height cad | 82,8 mm |
| Global depth cad | Other, of a width of not more than 20 mm |
| Weight of the product | 0,037 kg |
| Presentation of the device | Full product |
| Dielectrical force | 1300 V AC between contacts with holding capacity: micro-isolation disconnection 2000 V AC between coil and contact with holding capacity: basic insulation ((*)) insulation 2000 V AC between poles with holding capacity: basic insulation ((*)) insulation |
|---|---|
| Product certificates | The Commission CSA GOST Manufacture from materials of heading 810 Lloyd's |
| The rules | The following information shall be provided: The following information shall be provided: Manufacture from materials of heading 5404 |
| Storage room temperature | - 40 to 85 degrees |
| Operating room temperature | - 40 to 55 degrees |
| resistance to vibration | 3 gn, width = +/- 1 mm (state 1) 10 to 150 Hz) 5 cycles in operation 5 gn, width = +/- 1 mm (state 1) 10 to 150 Hz) 5 non-operating cycles |
| The IP protection level | The following information shall be provided: |
| Resistance to shocks | 10 gn for operation 30 gn for non-operating |
| Degree of pollution | 2 |