Modelo

LR-ZB100CP

Tipo

Distance Adjustment

Forma

Rectangular

Emisión

PNP

Conexión del cable

4-pin M8 connector

Distancia detectable

35 to 100 mm (1.38" to 3.94") (650 to 0)

• *1

Desviación de detección estándar

35 to 50 mm (1.38" to 1.97"): ± 1.5 mm (0.06")

50 to 100 mm (1.97" to 3.94"): ± 3 mm (0.12")

Resolución de display

2 (0.2 mm / 0.008")

Diámetro de punto

2 × 1 mm (0.08" x 0.04") to 100 mm (3.94")

Tiempo de respuesta

Selectable: 1.5 ms / 10 ms / 50 ms

Fuente de luz

Tipo

Red laser (660 nm)

Clase de láser

Class 1 laser product (IEC60825-1, FDA (CDRH) Part 1040.10 *2)

Función

• Indicator: 3-digit and 7-segment display (red), output indicator (yellow), DATUM indicator (orange), 1-point indicator (green)
• Timer: OFF / Delay ON / Delay OFF / Once

Clasificación

Voltaje de la fuente de alimentación

10 to 30 VDC, including 10% harmonic superior (P-P), Class 2 or LPS

Consumo de energía

450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)

Especificaciones

Salida de control

• Open-collector PNP
• Applied voltage: 30 VDC or less
• Control current: 100 mA or less
• Residual voltage: 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mA

Circuito de protección

• Protection against polarity inversion
• Output overcurrent protection
• Output overvoltage protection
• Output inversion protection

Operación de salida

Selectable between Light-ON or Dark-ON

Entrada externa

• Calibration time input: 35 ms or more ON, 35 ms or more OFF
• Laser emission stop: 2 ms or more ON, 20 ms or more OFF
• Short-circuit current: 2 mA or less *3

Resistencia ambiental

Grado de protección

IP68 (IEC60529)/IP69K (DIN40050-9)/4X, 6P, 13 (NEMA250)

Resina fotosensible de aislamiento

20 MΩ or more (500 V DC)

Luz ambiente

• Incandescent lamp: 4,000 lux or less
• Sunlight: 8,000 lux or less *4

Temperatura ambiente

-10 to +50 °C (14 to 122 °F) (No freezing)

Temperatura de almacenamiento

-25 to +75 °C (-13 to 167 °F) (No freezing)

Humedad relativa

35 to 85% HR (No condensation)

Voltaje no disruptivo

1,000 VAC, 50/60 Hz, 1 min

Resistencia a la vibración

10 to 55 Hz, Double Amplitude 1.5 mm (0.06"), 2 hours in each of the X, Y and Z directions

Resistencia a golpes

1,000 m/s² , 6 times in each of the X, Y and Z directions

Material

• Housing: SUS316L
• Display: PES
• Lens cover: PMMA with anti-scratch coating
• Connector/Sealing ring: FKM

Accesorios

Instruction manual, certification/identification label (FDA)

Peso

Approx. 55 g

*1 Reading of the display used as a guide for the detection distance. When determining the adjustment value, the reading is shifted. When the value exceeds “-99”, “-FF” is displayed.*2 The US FDA (CDRH) laser identification is implemented according to IEC60825-1 in compliance with the requirements of Laser Notice No. 50.*3 The M8 connector (3 pins) does not include the external input function.*4 When the response time is 10 ms