Puesto de prueba PCE-DLT 10 para ensayos de vapor
- Code / Model:
- Manufacturer: PCE Instruments
- Department:
- Category of products:
- Sub-category: Instruments and equipment
- You've seen it before.: 1
Test site for steam tests based on AMK-MB-005 / Automatic test procedure / Up to 5 test pieces
With the PCE-DLT 10 test point for steam tests, you can check the test steam resistance (ideal size of 300 x 200 mm) according to AMK-MB-005 dated 04/2015 - Moisture resistance and air conditioning - Test module 1 (W
In traditional tests the test area is limited by the size of the water container.
Another advantage of this test site for steam testing is that its airtight closure eliminates external influences, thus achieving high reproducibility.
Access to the test point for steam testing allows for easy handling of the tests, thus changing samples more quickly, easily and safely.
The temperature sensor is adjustable in height, which allows the temperature measurement point to be adjusted to the size of the sample, thus ensuring that the temperature is measured directly at the bottom edge of the sample, ensuring that the test conditions are constant, and simultaneously recording
The device indicates the current vapor temperature at the bottom edge of the sample and the remaining test time. It can change the color of the temperature value, which will help you see the current state with one glance.
The quality of the leak essentially determines the quality of the piece. A closed leak prevents moisture from penetrating. The fact that a piece resists the steam test is an index of the quality of the furniture. A closed leak is a primary requirement for a dur
The test is placed vertically on the PCE-DLT 10 test post. Three 30-minute steam cycles should then be applied, and allowed to dry outside the test post. Once the test is completed, the sample must be visually and tactile analyzed for damage such as sw
Analysis of test results in accordance with AMK or internal requirements of the company.
- Steam test according to AMK-MB-05
- Max. 5 test pieces
- Automatic test procedure with constant temperature
- Data recording
- Good-bad indication of temperature
- Determines the formation of swelling
- Control of leakage and edge lifting
- Max. 5 test pieces
- Automatic test procedure with constant temperature
- Data recording
- Good-bad indication of temperature
- Determines the formation of swelling
- Control of leakage and edge lifting
| Technical specifications | |
| The Commission shall adopt a decision on the | Based on AMK-MB-005 (04/2015) |
| The temperature control range | Automatically 50 ... 52 °C |
| Heating power | Other electricity |
| Screen | Color touchscreen |
| Memory | The following table shows the data of the data subject: |
| Registration fee | Max. 10 Hz (adjustable) |
| Interface | Other, of a kind used for the manufacture of goods The following information is provided: |
| Other heat pumps | PT100 class A, 4 threads |
| Food | 230 V AC / 50 Hz |
| Dimension | Other, of a width of not more than 600 mm |
| Weight | Approximately 36 kg |
