Pinza amperimétrica PCE-OC 5

Pinza amperimétrica PCE-OC 5

  • Code / Model:
  • Manufacturer: PCE Instruments
  • Department:
  • Category of products:
  • Sub-category: Instruments and equipment
  • You've seen it before.: 1
Digital amperimetric pin with oscilloscope function / 400 A AC / 600 V AC/DC / Temperature measurement /
Multi-meter TRMS with bandwidth of 2 kHz / Oscilloscope bandwidth of 200 kHz
The digital amperetric clamp is ideal for maintenance technicians, for stationary use in specialist commerce repair departments and laboratories. The amperetric clamp has been designed to measure alternating current up to 400 A AC. In addition to current measurement, the amperetric c
The ampere clamp can also be used to perform basic measurements of an oscilloscope. In the oscilloscope mode it can display continuous and alternating voltage as well as alternating current. This has the advantage that it can also display on the ampere clamp
The ampere clamp is powered by 3 AAA 1.5V batteries. Values and graphics are displayed on the LCD screen. In the multimeter mode it can store up to 100 values on the ampere clamp that it can retrieve on screen.

- 3 gauges in 1
- The LCD screen
- Measurement of current up to 400 A AC
- Glue aperture: 35 x 49 mm
- Temperature measurement
- Easy driving
- Graphical indication of the measuring signal
- Memory .


   
The following is the list of the parameters:  
Continuous voltage  
Rate Resolution max. Accuracy
Other electrical equipment 0,1 mV ±(1,5% of the value + 10 Dgt.)
4 V 0,1 mV Other, not further worked than hot-rolled
40 V 0,1 mV  
Other electrical equipment 0,1 mV  
Other electrical equipment 0,1 mV  
     
The following is the list of the parameters:    
Alternating voltage    
Rate Resolution max. Accuracy
4 V 1 mV ±(2% of the value. + 10 Dgt.)
40 V 1 mV 50 Hz ... 2 kHz)
Other electrical equipment 1 mV  
Other electrical equipment 1 mV  
     
The following is the list of the parameters:    
Other power    
Rate Resolution max. Accuracy
40 A 10 mA ±(2,5% of the value + 10 Dgt.)
400 A 0,1 A (A00A / 50 Hz)
     
The following is the list of the parameters:    
Frequency    
Rate Resolution max. Accuracy
10 Hz ... 30 kHz 0,1 Hz ±(1% of the value + 5 Dgt.)
    (Figure 4 ... 600 V)
     
The following is the list of the parameters:    
The resistance    
Rate Resolution max. Accuracy
400 Ω 0,1 Ω ±(1% of the value. + 5 Dgt.)
4 kΩ 0,1 Ω The following is the list of the following:
Other, of a kind used for the manufacture of goods 0,1 Ω  
Other, of a kind used for the manufacture of goods 0,1 Ω ±(3% of the value. + 5 Dgt.)
4 MΩ 0,1 Ω Other, of a kind used for the manufacture of goods
40 MΩ 0,1 Ω  
     
The following is the list of the parameters:    
Capacity    
Rate Resolution max. Accuracy
4 nF 1 pF ±(4% of the value. + 10 Dgt.)
40 nF 1 pF The following is the list of the products used:
Other, not further worked than hot-rolled 1 pF  
4 μF 1 pF ±(10% of the value. + 15 Dgt.)
Other, of a thickness of not more than 600 mm 1 pF (Figure 1)
4 mF 1 pF  
     
The following is the list of the parameters:    
The temperature    
Rate Resolution max. Accuracy
-20 ... 250 °C 1 °C The following conditions shall apply:
     
The method of oscilloscope  
Measurement functions Continuous voltage
  Alternating voltage
  Other power
   
Bandwidth 2 kHz
Sampling fee The following information shall be provided:
   
General technical specifications
Screen LCD
Food 3 x 1.5 V batteries, of type AAA
Absorbed power Approximately 80 mA
The Commission shall adopt the following measures: 180 minutes
Memory Multi-meter mode: 100 values
  Oscilloscope mode: 10 waveforms
Operating conditions 0 ... 40 °C; maximum 75% H.r.
Storage conditions -10 ... 60 °C; maximum 90 H.r.
The pressure of the gasket shall be measured. 35 x 49 mm
Dimension Other, of a thickness of not more than 10 mm
Weight Other, of a kind used for the manufacture of goods
   


Products Related