PCE-UTU 30 Tensile Tester
- Code / Model: PCE-UTU 30
- Manufacturer: PCE Instruments
- Department: Test and measurement
- Category of products: Weight and Strength Measurement
- Sub-category: Instruments and equipment
- You've seen it before.: 1
PCE-UTU 30 Tensile Tester
Note: This is just an example of a PCE-UTU 30 configuration. Depending on your application, you may need additional special fastening devices. Please contact us before placing an order so we can advise you. We will set up the configuration adapted to your needs. Please note that you must add assembly and training costs.
PCE-UTU 30 Tensile Tester
Tensile tester for tensile testing / generation of stress-strain diagrams / different versions / Regulated DC motor / breakage detection / variable test speed / force control / complex configuration options.
The tensile tester is suitable as a device for tensile testing. It is used with a tensile tester, a standardized normal method to determine the characteristics of materials, such as the determination of the elastic limit, tensile strength, elongation at break and other characteristics by applying the tensile tester.
As mentioned above, tensile testing is a standardized and destructive procedure used to examine materials. It uses standardized samples with a defined cross-sectional surface by applying extended force and fracture.
The expansion of the samples by the tensile tester is carried out without impact and with a regular force amplification. The tensile tester offers the possibility to determine the elastic limit, the tensile strength and the elongation at break of the tensile sample, among others. After the measurement, the tensile tester sends detailed results, which are transferred to the software as a stress-strain diagram. In this diagram, the obtained values and the characteristic magnitudes of the materials are clearly read.
- Measuring range: 0.6 ... 30 kN
- Accuracy class: 0.5
- Different versions
- Regulated DC motor
- Variable test speed
- Housing components coated with powder paint
- Breakage detection
- Maximum value memory
General Technical Specifications - PCE-UTU 30 Force Test Stand
| Parameter | Value |
|---|---|
| Nominal load | 30 kN |
| Accuracy classes | 0.5 / EN 7500-1 |
| Tension | Motor DC regulated |
| Test speed | 0.001 ... 500 mm/min, Resolution: 1 µm |
| Displacement | Incremental |
| Standard stroke | 1000 mm (without clamping device and clamping adapter) |
| Work space | 450 mm |
| Power supply | 230 V AC, 50 Hz |
| Structure | 2 polished guide columns |
| 2 ball screws | |
| Column coating with bellows seal | |
| Limit switch for stroke limitation | |
| Housing components coated with powder paint | |
| Color: RAL 7035 | |
| Safety installation | Polycarbonate cover |
| Safety contact | |
| Dimensions | 1330 x 650 x 530 mm |
| Weight | Approx. 180 kg |
General Technical Specifications of the Force Sensor for UPM
Installed under the moving beam for compression and tensile forces. Includes fastening material, plug, power socket and wiring.
| Parameter | Value |
|---|---|
| Measuring range | 600 ... 30000 N |
| Characteristic nominal value | 2 mV/V |
| Relative deviation of the characteristic value | ≤ ±0.1 % |
| Relative deviation of linearity | ≤ ± 0.02 % |
| Relative slip error | ≤ ±0.03 % after 30 min. |
| ≤ ±0.07 % after 8 h | |
| Normative | According to EN ISO 7500-1, class 0.5 |
| Overload | 50 % |
| Type of protection | IP 67 |
TEDS Module
Integrated, according to IEEE 1451-4, automatic sensor detection.
Technical Specifications of the Control and Electronic Evaluation System
| Parameter | Value |
|---|---|
| Measurement data acquisition | 1 kHz |
| Display | LCD screen |
| Interface | RS-232 |
| Functions | Force regulation |
| Displacement regulation | |
| Manual positioning | |
| Execution of a programmed sequence | |
| Specification of the crossbeam speed | |
| Return to the initial position | |
| Cycles | |
| Specification of the limit value for force / displacement / time | |
| Reset of the force / displacement indicator to 0 | |
| Adjustable regulation factor | |
| Breakage detection | |
| Maximum value recording | |
| with 2. force sensors: choice of working area |
Intelligent Measurement and Control Electronics
| Parameter | Value |
|---|---|
| Processor | 32-bit RISC architecture |
| Control loop | > 1 kHz |
| TEDS Module | Automatic sensor detection Standard IEEE 1451-4 |
| Interface | USB 2.0 |
| A/D Transducer | 2 x 24 bit A/D for DMS sensor Sampling rate: > 50 kHz |
| 2 x 10 bit A/D for additional signal processing Sampling rate: > 50 kHz | |
| 1 x incremental signal input for distance and angle measurement |
Software
Functions
- Tools for free programming of test sequences
- Tools for free programming of calculations
- Free configuration of a real-time graph with superimposition of several axes, free scale and manual analysis function
- Free configuration of the report format with inclusion of image files
- Individual or order recording, or export of test developments, calculation results and raw measurement values
- Integrated user management
- Automatizable
- Network-capable
- Multilingual
- License per machine, multiworkplace
Basic configuration for material testing
- 1 x Tensile test template
- 1 x Template for compression, bending or alternating load tests
- 1 x Template for tensile and compression spring tests
