Óhmetro PCE-MO 3001
- Code / Model:
- Manufacturer: PCE Instruments
- Department:
- Category of products:
- Sub-category: Instruments and equipment
- You've seen it before.: 1
Ohmmeter with a resolution of up to 1μΩ / rugged case / large LCD screen / powered through a battery /
The following information shall be provided:
The following information shall be provided:
The ohmmeter is intended to perform resistance measurements in very low measurement ranges. This ohmmeter works with the 4-wire measurement method to exclude errors in the measurement lines. With two conductors, this device allows a constant current source, a steady current
- Four-wire measurement method
- Selection from six measurement ranges
- Three different test currents with overheating protection
- Fuses at entry against very high currents
- Large LCD screen
- Maximum current of 1 A
- Auto-Hold and automatic shutdown function
- Robust and compact
- Safety: EN 61010-1
- Selection from six measurement ranges
- Three different test currents with overheating protection
- Fuses at entry against very high currents
- Large LCD screen
- Maximum current of 1 A
- Auto-Hold and automatic shutdown function
- Robust and compact
- Safety: EN 61010-1
| Measurement / resolution / precision ranges | The value of the underlying assets shall be reported in the following column: The value of the underlying assets shall be reported in the following column: The value of the underlying assets shall be reported in the following column: The value of the underlying assets shall be reported in the following column: The value of the underlying assets shall be reported in the following column: The value of the underlying assets shall be reported in the following column: |
| Test current | The following conditions shall apply: The following conditions shall apply: 1 A (range of 200 mΩ / 20 mΩ / 2 mΩ) |
| The test current accuracy | 10 mA: ± 1,5 % 100 mA: ± 2,0% 1 A: ± 3,0% |
| The maximum voltage output | 10 V rms |
| Food | The internal accumulator |
| Carcass | Polycarbonate / ABS |
| Dimension | Other, of a width of not more than 300 mm |
| Weight | Other, not further worked than cutting |
| The Commission shall adopt a decision on the | The following information is provided: |