Óhmetro PCE-IT 120
- Code / Model:
- Manufacturer: PCE Instruments
- Department:
- Category of products:
- Sub-category: Instruments and equipment
- You've seen it before.: 1
Other
Self-range insulation measurement up to 8 GΩ / Rugged case
Self-range insulation measurement up to 8 GΩ / Rugged case
The ohmeter measures insulation resistance up to a maximum of 8 GΩ (with auxiliary voltages of 250, 500 and 1000 V). This ohmeter also integrates the function of measuring alternating and continuous voltage in a range up to 950 V DC and 700 V AC,
The device complies with the standards DIN 57411 Part 1/VDE 0411 Part 1, Protection Measures for Electronic Devices (IEC1010-1) and DIN VDE 0413 (isolation meters). Although the ohmmeter is sent factory-fitted, you
Insulation resistance is the resistance in Ohmios in electrical lines, cables and installations. It is a very important measure for the prevention and protection of people from electric discharges or material damage caused by leakage currents.
The device complies with the standards DIN 57411 Part 1/VDE 0411 Part 1, Protection Measures for Electronic Devices (IEC1010-1) and DIN VDE 0413 (isolation meters). Although the ohmmeter is sent factory-fitted, you
Insulation resistance is the resistance in Ohmios in electrical lines, cables and installations. It is a very important measure for the prevention and protection of people from electric discharges or material damage caused by leakage currents.
- OLED screen
- Automatically indicating the polarity
- Automatic selection of the range
- Automatically set to zero
- Discharge pitch in the insulation measurement
- Protection against overload in continuity checks
- Safety function: the voltage is maintained for only 10 seconds (can be deactivated)
- Hold function
- PI and DAR tests
- Automatically indicating the polarity
- Automatic selection of the range
- Automatically set to zero
- Discharge pitch in the insulation measurement
- Protection against overload in continuity checks
- Safety function: the voltage is maintained for only 10 seconds (can be deactivated)
- Hold function
- PI and DAR tests
| Measurement range | 2 GΩ / 250 V |
| 4 GΩ / 500 V | |
| 8 GΩ / 1000 V | |
| The following conditions shall apply: | |
| DCV: 0 ... 700 V | |
| The following is the list of the following: | 0,01 ... 1999 Ω |
| Resolution adopted by the Council | Insulation: 1 / 10 / 100 MΩ |
| The following conditions shall apply: | |
| DCV: 1 V | |
| The following is the list of the following: | 0,01 / 0,1 / 1 Ω |
| Accuracy | Insulation: ±3 % |
| The following conditions shall apply: | |
| The following conditions shall apply: | |
| The following is the list of the following: | ± 2,0% |
| DC test voltage | The following is the maximum power output: |
| Electrical power | Other, not further worked than hot-rolled |
| Screen | OLED display with 2 lines and 16 characters |
| Food | 8 x 1.5 V batteries, type AA |
| Dimension | Other, of a width of not more than 300 mm |
| Weight | Approximately 655 g |
| Operating conditions | 0 ... 40 °C |
| Storage conditions | -10 ... 50 °C |
| Type of protection / Regulation | The following information is provided by the Commission: |
