CA-DRM10X Multispectral Illumination Model

Type

Multispectral Illumination

Illumination Method

Ring illumination (with optional dome accessory from the CA-DRM series (DA) and polarization accessory from the CA-DRM series (PA) *1)

• Multispectral illumination/LumiTrax™ illumination/Normal illumination (single-color illumination in all directions) *2

Constant Current Control Mode

Digital gradation of 1,024 steps: With CA-DC60E connected/adjustable by wavelength *3

Response Speed

1 ms or less

LED

Maximum Wavelength

• Ultraviolet: 405 nm
• Blue: 457 nm
• Green: 527 nm
• Orange: 600 nm
• Red: 660 nm
• Far-red: 730 nm
• Infrared: 860 nm
• White: 600 nm (all values are approximate)

Controller Connection

Dedicated cable (3 m /9.8'/5 m /16.4'/10 m /32.8'), max. 30 m /98.4' (with extension cables *4)

Interface Input

12-pin connector (dedicated cable)

Classification

Power Consumption

71.0 W (during normal light emission)

Environmental Resistance

• Ambient Temperature: 0 to 40 °C /32 to 104 °F
• Relative Humidity: 35 to 65% HR (no condensation)

Weight

Approx. 600 g (With dome accessory: Approx. 820 g / With polarization accessory: Approx. 810 g)

• *1 The UV and IR wavelengths cannot be used when the polarization accessory is added.
• *2 Continuous illumination can only be adjusted during normal illumination, when the brightness value control is ON.
• *3 Simultaneous illumination of multiple colors is not supported.
• *4 Up to two dedicated extension cables are allowed.