Medidor de revestimiento PCE-CT 5000H
- Code / Model:
- Manufacturer: PCE Instruments
- Department:
- Category of products:
- Sub-category: Instruments and equipment
- You've seen it before.: 1
Coating gauge for non-destructive testing / To measure on metallic bases Fe and NFe / Internal memory / Automatic disconnection / Limit value adjustment / 1 to 4 point calibration and zero point calibration
The coating meter is an instrument for quickly determining the coating thickness on ferrous and non-ferrous metals. The coating meter automatically detects the base type. Once the equipment is turned on, it is ready to measure. The measuring method is non-destructive
Before you make a measurement, you can adjust limit values in the coating meter. If the measured value is outside the set limit values, the screen will project a message that allows you to detect a thickness too thin or thick at the measuring site. This is especially useful in the
Before you make a measurement, you can adjust limit values in the coating meter. If the measured value is outside the set limit values, the screen will project a message that allows you to detect a thickness too thin or thick at the measuring site. This is especially useful in the
- Immediate measurement
- High measurement range
- High precision
- Scratch V on the head
- I drive with one hand
- Indication in μm/mm and mils (switchable)
- High measurement range
- High precision
- Scratch V on the head
- I drive with one hand
- Indication in μm/mm and mils (switchable)
| The probe | Types of faith | Type of NFe |
| Rate | 0 ... 5000 μm | Other, of a kind used for the manufacture of goods |
| Principle of measurement | Magnetic induction | Foucault's current |
| Accuracy | The following is the list of the following: | The following is the list of the following: |
| Resolution adopted by the Council | The following is the list of the following: 100 ... 999 μm: 1 μm Other, of a width of > 600 mm | The following is the list of the following: 100 ... 999 μm: 1 μm Other, of a width of > 600 mm |
| Calibration | Calibration from 1 to 4 points, The following shall be added: | |
| Memory | Direct measurement (without data recording) 4 data sets (automatic data recording of up to 2000 values) | |
| The function of statistics | Number of measurements, average, minimum, maximum, standard deviation | |
| Measurement units | Other, of a kind used for the manufacture of goods | |
| Alarm | Adjustment of limit values, indication of the alarm symbol when exceeding the limits | |
| Radius of curvature of the minimum (convex) | 5 mm | |
| Radius of minimum curvature (concave) | 25 mm | |
| Minimum measuring surface | The following is the list of the following: | |
| Minimum thickness of the base material | 0,02 mm | 0,05 mm |
| Maximum measurement quota | 2 measurements per second | |
| Interface | Data transfer by USB | |
| Food | 2 x 1.5 V batteries, of type AAA | |
| The menu | German, English, Russian, Chinese | |
| Operating conditions | 0 ... +50 °C, 20 ... 90% H.r. | |
| Storage temperature | -10 ... +60 °C | |
| The Commission shall adopt a decision on the | The Commission shall adopt implementing acts in accordance with Article 21 of this Regulation. | |
| Dimension | Other, of a thickness of not more than 10 mm | |
| Material of the housing | Other, not further worked than hot-rolled | |
| Weight | 92 g | |
