Manual Pump for Rotor Lock Activation
- Code / Model:
- Manufacturer:
- Department: Manual tools
- Category of products: Special tools
- Sub-category: Tools for pipelines
- You've seen it before.: 1
Manual Pump for Rotor Lock Activation
This manual provides instructions on how to activate the rotor lock using a hand pump.
- Step 1: Locate the hand pump and connect it to the designated port on the rotor assembly.
- Step 2: Ensure the valve on the hand pump is closed.
- Step 3: Slowly pump the handle of the hand pump until you feel resistance. This indicates that pressure has been built up in the system.
- Step 4: Open the valve on the hand pump to release the pressurized air into the rotor lock mechanism.
- Step 5: Once the rotor lock is activated, close the valve on the hand pump and disconnect it from the rotor assembly.
