Model

LK-G5001V

Specifications

• Type: Separated Type
• LK-G5001/LK-HD500 Compatibility: Compatible
• Main Controller Type: Main Controller
• Compatible Head Number: 2
• Display:
• Minimum Display Unit: LK-HD500: 0.001 µm
• Display Range: LK-HD500: ±999.999 µm to ±9,999.99 mm (7 selectable adjustments)
• Display Cycle: LK-HD500: Approx. 10 times/sec.
• Display Interface:
• Display Port: Can connect to either a display unit (LK-HD500) or a dedicated touch panel (LK-HD1001)
• LED Indicator: LASER ON
• Terminal Block:
• Analog Output Voltage: ±10 V, Output Impedance: 100 Ω
• Analog Current Output: 4 to 20 mA, Maximum Load Resistance: 350 Ω
• Number of Analog Outputs: 2
• Input Terminals:
• TIMING 1 Input: Voltage-free input
• INITIALIZATION 1 Input
• Auto-Zero 1 Input
• Laser Control Input: Voltage-free input
• Remote Laser Input: Voltage-free input
• Output Terminals:
• Alarm Output: NPN open collector output
• General Comparator Output
• Expansion Connector Input: Timer input, Voltage-free input
• Expansion Connector Input: INITIALIZATION input, Auto-Zero input, Program switch input, Binary selection input
• Expansion Connector Output: Alarm output, NPN open collector output, Comparator output, Binary output
• Interface:
• RS-232C Interface: Baud rate: 9,600 to 115,200 bps, Data length: 8 bits, Stop bit length: 1 bit, Parity: None/Even/Odd
• USB Interface: USB 2.0 compatible with high speed
• Ethernet Interface: 100Base-TX/10Base-T
• EtherNet/IP™ Interface:
• Cyclic Communication (Implicit Messaging)
• Message Communication (Explicit Messaging) UCMM and Class 3
• Number of Connections: 32
• Complies with CT14 conformity test version
• PLC-Link:
• Supported PLCs: Mitsubishi Electric: MELSEC iQ-R, iQ-F, Q, L, FX series
• EtherNet/IP™ , CC-Link and DeviceNet™ cannot be used together with PLC-Link
• Expansion Connector:
• Up to 10 head expansion units can be connected to one main unit
• Can connect either the CC-Link unit (LK-CC100) or the DeviceNet™ unit (LK-DN100)
• Power Supply:
• Supply Voltage: 24 VCC ±10 %
• Maximum Current Consumption: 0.6 A or less with 1 head / 3.5 A or less with 12 heads
• Environmental Resistance:
• Ambient Temperature:
• With one or fewer head expansion units connected: 0 to 50 °C (32 to 122 °F)
• With two or more head expansion units connected: 0 to 40 °C (32 to 104 °F)
• Relative Humidity: 35 to 85 % HR (No condensation)
• Weight: Approx. 600 g

Notes

• *1 Nominal open-collector NPN output value: 50 mA max. (40 V max.), Residual voltage: 0.5 V max. Nominal no-voltage input value: ON voltage: 1 V max., OFF current: 0.6 mA max.
• *2 Part of the input/output circuit of the LK-G5000 series is internally common. Be careful not to generate a potential difference between the internal common terminals caused by the potential difference between external cables/devices. For more details, refer to "Wiring Precautions" in the User Manual.
• *3 This input applies to all synchronized OUTs.
• *4 When connecting a Class 3B laser head, use a key switch for the input to this terminal. The laser will only emit when the key switch is in the ON position. (Select keys that can only be removed when in the OFF position.)
• When connecting Class 2/3R laser heads, the laser turns on when the terminal is open and off when it is shorted.
• *5 When connecting a PC with USB 1.1 or USB 2.0 high speed, the data update cycle and other operations may slow down.
• *6 Use the Ethernet interface only for direct connections to a PC or for local network connections with a PC or LK-G5000 series units.
• *7 The EtherNet/IP™ interface cannot be used when installing a CC-Link unit or a DeviceNet™ unit. EtherNet/IP™ is compatible with the latest controllers. For details on which controllers are compatible with EtherNet/IP™, contact your nearest KEYENCE office.