KEYENCE GT2-A12
- Code / Model:
- Manufacturer: Keyence
- Department:
- Category of products:
- Sub-category: For the purposes of this Regulation, the following shall apply:
- You've seen it before.: 1
Specifications
|
Model of the |
The following table shows the following: |
|||
|
Detection system |
Quartz glass scale, CMOS image sensor projection system, absolute type (without traction errors) |
|||
|
Measurement range |
12 mm 0,47" |
|||
|
Resolution adopted by the Council |
The following table shows the following: |
|||
|
Accuracy indicated |
The following table shows the results of the calculation of the total weight of the product:*1 |
|||
|
Measuring force |
Mounted down |
1.2 N*2 |
||
|
Other, of a kind used for the manufacture of goods |
1.1 N*2 |
|||
|
Mounted up |
The following is the list of the products:*2 |
|||
|
Sampling cycle |
1 ms |
|||
|
Operating indicator light |
2 coloured LED (red, green) |
|||
|
Environmental resistance |
Degree of protection |
Other, not further worked than cutting*3 |
||
|
Pressure resistance |
1 MPa |
|||
|
Applied pressure range |
0,25 to 0,5 MPa |
|||
|
The temperature of the room |
From 0 to +55 °C 32 to 131 °F (without freezing) |
|||
|
Relative humidity |
35 to 85 % HR (without condensation) |
|||
|
Vibration resistance |
10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the directions X, Y and Z |
|||
|
Stroke resistance |
The following conditions shall apply:2The following table shows the following: |
|||
|
Other materials |
Main framing |
The main unit cover: zinc pressure casting, cylinder: aluminium alloy, |
||
|
Other, of a kind used for the manufacture of goods |
NBR |
|||
|
Contact |
Stainless steel of a width of <= 600 mm*4 |
|||
|
Head cable |
Optional (M8 connector) |
|||
|
Weight |
Approximately 145 g (excluding cable) |
|||