FS-V11 Photoelectric Sensor

Model

FS-V11

Type

Main Unit

Light Source

Red LED

Response Time

250 μs (FINE)/500 μs (TURBO)/1 ms (SUPER TURBO)

Operating Mode

Light-ON/DARK-ON (Selection by selector)

Indicator Lamp

• Display Indicator: Red LED
• Digital LED Monitor: Seven segments, four digits, red LED.
• Bar LED Monitor: One orange LED and six green LEDs.

Timer Function

ON Delay: 40 ms, OFF Delay: 10 ms, Timer OFF (Selection by selector)

Signal Output

Open-Collector NPN 100 mA max. (24 VCD max.), Residual Voltage: 1 V max.

Protection Circuit

• Reverse Polarity Protection
• Overcurrent Protection
• Transient Protection

Expansion Units

Up to 16 expansion units can be connected (for a total of 17 units).

*1 Suppress mutual interference:

• FINE: 4
• TURBO/SUPER: 8

Classification

• Power Supply Voltage: 12 to 24 VCD (±10%), Residual Ripple Ratio (P-P) 10% max., Class 2 *2
• Current Consumption: 50 mA max.

Environmental Resistance

• Ambient Illumination:
• Incandescent Light: 10,000 lux max.
• Sunlight: 20,000 lux max.
• Operating Ambient Temperature: -10 to +55°C (14 to 131°F), no freezing
• Operating Ambient Humidity: 35 to 85% HR (no condensation)
• Vibration: 10 to 55 Hz, Double Amplitude: 1.5 mm (0.06"), 2 hours each in the X, Y and Z axes
• Shock Resistance: 500 m/s² in the X, Y and Z directions, 3 times respectively

Structure Material

Polycarbonate

Weight

Approx. 80 g

*1 If more than one unit is used, the ambient temperature varies. Mount the units on the DIN rail with mounting hardware and verify that the output current is less than 20 mA.

3 to 10 units: -10 to +50°C (14 to 122°F), 11 to 16 units: -10 to +45°C (14 to 113°F)

*2 Neither the FS-V12 nor the FS-V10 can be used as a standalone unit.