KEYENCE AP-31K
- Code / Model:
- Manufacturer: Keyence
- Department: Test and measurement
- Category of products: Pressure measurement
- Sub-category: Pressure calibrators
- You've seen it before.: 10
AP-31K Pressure Gauge
Model
AP-31K
Type
Negative pressure, NPN
Nominal Pressure
0 to -29.9 inchHg
Detectable Fluids
Air or non-corrosive gases
Pressure Type
Pressure Gauge
Display
3 1/2 digit, 2 colors, LED 7-segment (character height: 11 mm 0.43")
Display Resolution
0.001 bar, 0.1 inchHg, 0.1 kPa, 1 mmHg
Detectable Pressure Range
-15 to +110 % of the total scale
Temperature Fluctuation for Display
±1 % max. (of the total scale) of detection pressure at 25 °C 77 °F (0 to 50 °C 32 to 122 °F)
Temperature Fluctuation for Analog Output
±2 % max. (of the total scale) of detection pressure at 25 °C 77 °F (0 to 50 °C 32 to 122 °F)
Response Time (Anti-Flutter Function)
2.5/5/100/500 ms (selectable)
I/O
Analog Output
1 to 5 V (load impedance: 47 kΩ min.)
Control Output
Open-collector NPN 100 mA max. (40 V max.), residual voltage: 1 V max. 2 outputs (N.O./N.C., selectable)
Nominal Value
Power Supply Voltage
12 - 24 VCD ±10 % or less, ripple (P-P) 10 % or less
Current Consumption
50 mA (at 24 VCD) or less, 90 mA (at 12 VCD) or less
Environmental Resistance
Pressure Resistance
72.5 PSI
Ambient Temperature
0 to +50 °C 32 to 122 °F (No freezing)
Relative Humidity
35 to 85 % HR (No condensation)
Vibration Resistance
10 to 55 Hz, Double Amplitude 1.5 mm 0.06", 2 hours in each of the X, Y and Z directions
Material
- Front Frame: Polyamide
- Front Panel Sheet: PET
- Rear Frame: Polycarbonate
- Pressure Terminal: Cast Zinc
- Cable: Insulated cable with oil-resistant rubber tube
Weight
Approx. 120 g