Huawei SUN2000P-600W Optimizer

This product description is for a Huawei SUN2000P-600W optimizer with code 02313TTE-003. This optimizer allows for the optimization of a solar panel within a string of panels connected to a Huawei SUN2000 L1, M1, M2, and M3 series inverter.

Benefits

• Thanks to this optimizer, when a shadow acts on one of the panels with the optimizer, the total performance of the string will not be affected, increasing the total production of the installation.

Specifications

The maximum nominal power of the panel is 600w+-5%. Monitoring can be obtained panel by panel thanks to the MBUS CC connection. This allows us to monitor the power and performance of each panel.

Communication is carried out via PLC through the direct current wiring that comes from the panels.

Features

• The Huawei SUN2000P-600W Smart PV Optimizer has an IP68 protection rating and comes with an accessory to be installed underneath the frame of the solar panel it is connected to.
• It has a 1m cable to facilitate connection.
• It accepts an input of 600w, with a tolerance of +5%, making it possible to install modules up to 630w, although the output would be limited to 600w.
• In any case, rarely do the STC conditions of radiation and temperature occur, to which the panel gives its maximum power, so there would be no problem installing panels of 630w without losing performance.
• The voltage range in which it operates is 10-80v, and the short-circuit current is 15A, so it would not be compatible with G12 Half Cut cell panels, which typically have 18A.