FS-M1P Fiber Optic Amplifier, Cable Type, Master Unit, PNP
- Code / Model: FS-M1P Amplificador de fibra, tipo cable, unidad padre, PNP Keyence
- Manufacturer: Keyence
- Department: Reels and signal conditioning
- Category of products: For the purposes of this Regulation, the following definitions shall apply:
- Sub-category: For the purposes of this Regulation, the following definitions shall apply:
- You've seen it before.: 1
FS-M1P Photoelectric Sensor
Model
FS-M1P
Type
Main Unit
Emission
PNP
Light Source
Red LED
Sensitivity Adjustment/Mode Selection
8-turn potentiometer (with indicator), selection by FINE/TURBO selector
Response Time
250 µs (FINE) / 500 µs (TURBO)
Operating Mode
Light-ON/DARK-ON activated (selection by selector)
Indicator Lamp
Output: Red LED; Stable operation: Green LED
Timer Function
ON delay 40 ms / OFF delay 40 ms / Timer OFF (selection by selector)
Input/Output
Input
―
Signal Output
Open-collector PNP 100 mA max. (40 VCD max.), Residual voltage: 1 V max.
Stability Output
Open-collector PNP 50 mA max. (40 VCD max.), Residual voltage: 1 V max.
*1
Protection Circuit
Reverse polarity protection, overcurrent protection, transient protection
Expansion Units
Up to 16 expansion units can be connected (for a total of 17 units).
*2
Mutual Interference Suppression
- FINE: 4
- TURBO/SUPER: 8
Rated Values
Operating Voltage
12 - 24 VCD ±10%, ripple (P-P) 10% or less
Current Consumption
35 mA or less
Ambient Resistance
Ambient Light
Incandescent lamp: 10,000 lux max., Sunlight: 20,000 lux max.
Ambient Temperature
-10 to +55 °C (14 to 131 °F) (No freezing)
*3
Relative Humidity
35 to 85% HR (No condensation)
Vibration Resistance
10 to 55 Hz, Double amplitude 1.5 mm (0.06"), 2 hours in each of the X, Y, and Z directions
Shock Resistance
500 m/s² , 3 times in each of the X, Y, and Z directions
Structure Material
Polycarbonate
Accessories
―
Weight
Approx. 75 g
