Fiber Amplifier, Cable Type, Parent Unit, NPN

Code / Model:
Manufacturer: Keyence
Department: Passive components
Category of products: EMI protection and filters
Sub-category: Unclassified
You've seen it before.: 1

Description of the product

Model

FS-N11N

Type

Standard 1 Output

Cable

Emission

NPN

Main Unit/Expansion Unit

Main Unit

Control Output

1 NPN open-collector 24 V; max. 1 output: 100 mA or less; total 2 outputs: 100 mA or less (using only)/20 mA or less (multiple connections); residual voltage 1 V or less

Analog Output (1-5 V)

External Input

Response Time

50 µs (HIGH SPEED)
250 µs (FINE)
500 µs (TURBO)
1 ms (SUPER)
4 ms (ULTRA)
16 ms (MEGA)

Multiple Connections to Expansion Units

Up to a total of 16 units can be connected (the two-output unit counts as two units)

Light Source

Red, 4-element LED

APC

Selectable ON/OFF (Factory parameter: OFF)

Number of Units with Interference Prevention

0 for HIGH SPEED; 4 for FINE; 8 for TURBO/SUPER/ULTRA/MEGA (When set to double, the number of interference-prevention units will be doubled.)

Rated Value

Power Supply Voltage

12 - 24 VCD ±10 %, ripple (P-P) 10 % or less

Classification

Current Consumption

Normal: 900 mW or less (36 mA max. at 24 V, 48 mA max. at 12 V)
*1 Eco Mode On: 800 mW or less (32 mA max. at 24 V, 39 mA max. at 12 V)
*1 Eco Mode Full: 470 mW or less (19 mA max. at 24 V, 23 mA max. at 12 V)

Ambient Resistance

Ambient Light

Incandescent lamp: 20,000 lux or less, Sunlight: 30,000 lux or less

Ambient Temperature

-20 to +55 °C (-4 to 131 °F) (No freezing)

Relative Humidity

35 to 85 % HR (No condensation)

Vibration Resistance

10 to 55 Hz, Double Amplitude 1.5 mm (0.06"), 2 hours in each of the X, Y, and Z directions

Shock Resistance

500 m/s², 3 times in each of the X, Y, and Z directions

Enclosure Material

Material of the main unit and expansion unit cover: Polycarbonate

Weight

Approx. 75 g

*1 Increases 100 mW (4.0 mA) for High Speed Mode

*2 One or more connected units: -20 to +55 °C (-4 to 131 °F); 3 to more than 10 connected units: -20 to +50 °C (-4 to 122 °F); 11 to more than 16 connected units: -20 to +45 °C (-4 to 113 °F). The two-output units are counted as two units. All temperature standards apply when the unit is mounted on a DIN rail and installed in metal sheets.