Festo 8001206 SPAU-P10R-T-R18M-L-PNLK SENSOR PRESION
- Code / Model:
- Manufacturer: Festo Neumatica
- Department:
- Category of products:
- Sub-category: Machinery and accessories
- You've seen it before.: 1
- The following is the list of the symbols:
- Certification of the manufacturer (s)
- CE marking (see declaration of conformity)According to the EU EMF Machinery DirectiveAccording to the EU RoHS Directive
- UKCA marked (see declaration of conformity) according to UK regulations on EMCs according to UK RoHS
- The symbol is KCKC-CEM.
- Note on materialCompliance with the RoHS Directive
- Measurement magnitude Relative pressure
- Measurement procedurePiecerresistant pressure sensor
- Initial value of the pressure measurement margin0 bar
- The final value of the pressure measurement margin10 bar
- Maximum pressure of overload 15 bar
- Air compressed according to ISO 8573-1:2010 [7:4:4] Inert gases
- Note on the workpiece/control Can be used with lubricated compressed air
- The temperature of the medium0 °C ... 50 °C
- The temperature of the room0 °C ... 50 °C
- The following is the list of the following:
- Accuracy in ±%FS1,5%FS
- Repeating accuracy in ± %FS0.3 %FS
- The temperature coefficient is ± %FS/K0.05 %FS/K
- Output2 x PNP or 2 x NPN switch
- Freely programmable switching function
- Function of the switching elementNormally closed/open, switching
- Output current of 100 mA or more
- The following is the list of the types of vehicles that are included in the calculation:
- Rise time3 ms
- Maximum load resistance at current output500 Ohm
- Minimum load resistance at the output voltage10 kOhm
- Resistance to short circuits
- The following information shall be provided:
- The following information is provided for in the Annex to Implementing Regulation (EU) No 1303/2013.
- The following information is provided for in the Annex to Implementing Regulation (EU) No 1308/2013:
- The following is a list of the main types of data that are used in the process:
- The Commission has also adopted a proposal for a regulation on the protection of the environment.
- The following information is provided by the Commission in the Official Journal of the European Union.
- The following information is provided for in the Annex to Implementing Regulation (EU) No 1095/2013:
- The data set is the same as the data set.
- The data set is the same as the data set.
- The data shall be reported in the following formats:
- The following conditions shall apply:
- IO-Link®, data memory required500 byte
- The following shall be reported:
- Protection against polarity reversal For all electrical connections
- Electrical connection 1, type of connectionConnector
- Electrical connection 1, connection techniqueM12x1, coding A according to EN 61076-2-101
- Electrical connection 1, number of contacts/wires4
- Electrical connection 1, distribution of connections00995386
- Type of fixture With thread
- Assembly positionAnybody
- Air connectionR1/8
- Weight of the product80 g
- Type of indicatorLCD backlit
- Unit (s) representative (s) MPa bar inH2O inHg kPa kgf/cm2 mmHg psi
- Adjustment capabilitiesIO-Link® Teach-In By means of screen and buttons
- Security against manipulationIO-Link® PIN code
- Adjustment margin of threshold values 0 % ... 100 %
- Hysteresis adjustment margin of ... 90%
- The following information is provided by the manufacturer:
- The following information is provided in the Annex to Implementing Regulation (EU) No 575/2013:
- The following conditions shall apply:
